WORK Microwave RSCM1 1:1 Redundancy Switch Controller

In stock
SKU
WORK-RSCM1
  • Used for 1:1 redundancy configurations
  • Can operate in automatic mode
  • Two power supplies and two AC input connectors
  • Controlled from the front panel or remotely

WORK Microwave RSCM1 1:1 Redundancy Switch Controller

The WORK Microwave Redundancy Switch 1:1 is used for 1:1 redundancy configurations for Upconverters, Downconverters, Modulator-Upconverters, Transport Stream Modulators, Demodulators, and Modems. It comes standard with a coaxial signal splitter for the input signal and a coaxial signal switch for the output signal. An input signal switch instead of the signal splitter is available as an option. For IP modem applications a similar device, RSCI1 is available.

LNAs or even HPAs can be included within the system, as the switch is capable to control external waveguide transfer switches as option. DC power to LNAs can also be provided as option. The switch accepts alarm signals from two types of equipment, so that it can be used for redundancy configurations with e.g. a video encoder and a modulator within one chain.

The units can be controlled from the front panel or remotely via RS 232, RS422/485, or IP over Ethernet.

The unit can operate in automatic mode, whereby an automatic switchover to the standby unit is performed upon detection of an alarm generated by the active unit. In addition, a manual switchover to the standby unit can be initiated.

Two power supplies and two AC input connectors guarantee high availability of the unit.

The 1:1 redundancy is also available in an outdoor version, where the signal splitter and the signal transfer relay is mounted within an outdoor switch box. The control unit is similar to the indoor redundancy controller, but does not include any signal splitters or signal switches. The outdoor switch box also includes interfaces for alarms and M&C of outdoor units. A control cable runs from the outdoor switch box to the indoor redundancy controller.

1:1 Redundancy with Signal Splitter
More Information
Weight7.0000
Country of ManufactureGermany
ManufacturerWork Microwave
Input Power90 - 264 VAC
Warranty3 Years
Write Your Own Review
You're reviewing:WORK Microwave RSCM1 1:1 Redundancy Switch Controller
Ask a question about: WORK Microwave RSCM1 1:1 Redundancy Switch Controller
101 Eagle Road Building 7. Avon, Colorado. 81620.
T : (970)-748-4250.
E: info@satcomresources.com
Copyright © 2001-2018 Satcom Resources™. All rights reserved.