Work Microwave SDD-IP DVB-S2 IP Demodulator

Out of stock
SKU
WORK-SDD-IP
  • Applications: IP Networking, Governmental
  • DVB-S2 compliant / all modulations
  • Symbol rates from 60 ksps to 80 Msps
  • Roll-off down to 5%

Work Microwave SDD-IP DVB-S2 IP Demodulator

Work Microwave's SDD-IP DVB-S2 IP Demodulator is designed to provide demodulation of DVB-S and DVB-S2 signals.

The Work Microwave's SDD-IP DVB-S2 IP Demodulator provides operators with a platform for receiving IP/Ethernet data over DVB-S2 satellite connections. The device is the corresponding demodulator unit to the DVB-S2 IP modem SK-IP and supports low overhead Generic Stream Encapsulation and Multiprotocol Encapsulation. In combination with the integrated support of OptiACM and VideoACM, the demodulator provides adaptive or variable FEC and modulation setting for point-to-point or point-to-multipoint applications.

Work Microwave's SDD-IP DVB-S2 IP Demodulator Key Features

  • DVB-S2 - ETSI EN 302 307-1 DVB-S - ETSI EN 300 421
  • DVB-S2 demodulation QPSK / 8PSK / 16APSK / 32APSK
  • DVB-S demodulation QPSK
  • Normal and short FEC frames, pilots on or off (DVB-S2)
  • Physical layer framing with descrambling codes 0 to 262141 according to DVB-S2 standard
  • Automatic reception of Roll-Off: 35 %, 25 %, 20 %, 15 %, 10 %, 5 %
  • Symbol rates from 60 ksps to 80 Msps
  • Data rate max 356 Mbps
  • OptiACM and VideoACM
  • Gigabit Ethernet data interface
  • 2 ASI Output Interfaces (SDD-TS / SDD-DV)
  • 6 ASI Output Interfaces for up to 6 Multiple Transport Streams (Option MT6) (SDD-TS / SDD-DV)
  • Generic Stream Encapsulation (GSE), Multiprotocol Encapsulation (MPE)
  • Network layer 2 or layer 3 operation
  • Remote control through RS232, RS422/485 (2-wire or 4-wire) interfaces, TCP/IP over Ethernet, Web browser interface, SNMP with MIBs downloadable from the device
  • Summary alarm output with dual change over switch contacts
  • Operating temperature range 0° C to 50 °C (32 °F to 122 °F)
  • CE compliant
  • 3 years warranty

Operating and control – easy integration into your system

The configuration of the demodulator can be controlled via the front panel keys or remotely via RS232, RS422/485 and TCP/IP (over Ethernet). For the remote control addressable packet-based commands, an HTTP Web browser interface, or SNMP can be used. Detailed monitoring of system parameters is possible.

More Information
Weight13.0000
Country of ManufactureGermany
ManufacturerWork Microwave
Input Power90 - 264 VAC
Max Data Rateup to 356 Mbps
Max Symbol RateMax. Range (option S80): 500 ksps … 80 Msps (QPSK, 8PSK, 16APSK, 32APSK)
ModulationQPSK, 8PSK, 16APSK, 32APSK
FECDVB-S2, DVB-S, LDPC
WarrantyNo
Dimensions483 x 44 x 470 mm (WxHxD), 1 RU (19")
Write Your Own Review
You're reviewing:Work Microwave SDD-IP DVB-S2 IP Demodulator
101 Eagle Road Building 7. Avon, Colorado. 81620.
T : (970)-748-4250.
E: info@satcomresources.com
Copyright © 2001-2018 Satcom Resources™. All rights reserved.