Baird PXL-2 HD Non-Penetrating Roof Mount

SKU
BAIR-PXH-T-
  • Designed for Antenna up to 12.5' (3.8M)
  • Footprint: 17.7' x 17.7' = 313.3 sq ft (3 Tray)
  • Footprint: 20.3' x 20.3' = 412.1 sq ft (4 Tray)
  • Mast: 5.50", 5.56", 6.62", 10.75" O.D. x 2.5', 3', 4', 4.3', 5', or 5.5'
  • Schedule 80 Option Available
  • Hot Dip Galvanized Finish
  • Includes Rubber Roof Pad
  • Baird PXL-2 HD Non-Penetrating Roof Mount

    The Baird PXL-2 HD is a heavy duty version of the standard PXL-2 non-penetrating mount. The mount and mast is designed and tested to handle a 12.5' (3.8M) antenna. Larger antennas may be used with the PXL-2 H.D. however, each installation must be examined to determine if the mount can withstand the wind loads which may be applied.

    Ballast required will be recommended based on antenna diameter, type and survival requirements.

    It is the customer’s responsibility to see that all applicable codes are satisfied. It is suggested that a structural engineer review the application of this product.

     

    Baird PXL-2 HD Outline Drawing
    More Information
    Weight1230.0000
    Country of ManufactureUnited States
    ManufacturerBaird Satellite
    Mount TypeNon-Penetrating Roof Mount (NPRM)
    Antenna Size3.0m, 3.1m, 3.7m, 3.8m
    Mount Trays3 Trays, 4 Trays
    Dimensions17.7' x 17.7' = 313.3 sq ft (3 Tray), 20.3' x 20.3' = 412.1 sq ft (4 Tray)
    Warranty10 Years
    Ballast SupportedUp to 96 (3 Tray) or 128 (4 Tray) Standard Concrete Blocks (8" x 8" x 16")
    Write Your Own Review
    You're reviewing:Baird PXL-2 HD Non-Penetrating Roof Mount
    Ask a question about: Baird PXL-2 HD Non-Penetrating Roof Mount
    101 Eagle Road Building 7. Avon, Colorado. 81620.
    T : (970)-748-4250.
    E: info@satcomresources.com
    Copyright © 2001-2018 Satcom Resources™. All rights reserved.