Xicom XTD-450KD 450W Ku and DBS-Band Antenna Mount TWTA

SKU
XICO-XTD-450KD
  • No shelter required
  • Extended frequency bands available
  • Variable gain corrected
  • High efficiency

Xicom XTD-450KD 450W Ku and DBS-Band Antenna Mount TWTA

The Xicom Technology XTD-450KD is a compact, self-contained, antenna mountable power amplifier designed for low cost installation and long life. Its design eliminates the need for an amplifier shelter as well as a long waveguide run between the amplifier and the antenna feed horn. RF filters, cooling, and monitoring & control (M&C) systems are all self-contained within the High Power Amplifier (HPA). These features provide high reliability, low maintenance costs, and low replacement costs.

The XTD-450KD uses high efficiency, dual-stage collector Traveling Wave Tubes (TWT). Some benefits of this type of TWT are: reduced prime power consumption, lower internal operating temperatures, reliability enhancement. These benefits are obtained for both the linear and saturated modes of operation.

The XTD-450KD incorporates power factor correction circuitry, which minimizes line current distortion and reduces the required volt-amps. The combination of power factor correction and high efficiency TWTs reduces input Volt-Amps by 45% when compared to equivalent amplifiers. A high efficiency resonant conversion power supply is used that accepts a wide range of prime power (180 to 260 VAC). The automatic features of the power supply include quick recovery from prime power outages and multiple helix fault resets (three fault cycles). A complete serial M&C system is built into the unit. The unit may be configured for single-thread, redundant, phase-combined, or linearized operation. A remote external controller is available to operate the HPA from a user selected location. Mounting brackets can be supplied to mount the HPA to most popular antennas.

XTD-450KD Key Features

  • No shelter required
  • Extended frequency bands available
  • Variable gain corrected
  • High efficiency
  • RS-232/422/ 485 interface
  • Optional integrated linearizer
More Information
Weight75.0000
Country of ManufactureUnited States
ManufacturerXicom Technologies
Prime FrequencyKu-Band, DBS-Band
Amplifier TypeTWTA
Rated Output Power450W
Power Rating MethodPSAT
Input Frequency10.95 - 11.75 GHz, 10.95 - 12.75 GHz, 10.95 - 13.25 GHz
LO FrequencyN/A
Output Frequency12.75 - 14.5 GHz, 13.75 - 14.5 GHz, 17.3 - 18.4 GHz
Output InterfaceWR62 Flange
Input Power180 - 260 VAC
Power Consumption2400 VA (maximum)
Dimensions21.50" x 11.95" x 12.75"
Write Your Own Review
You're reviewing:Xicom XTD-450KD 450W Ku and DBS-Band Antenna Mount TWTA
Ask a question about: Xicom XTD-450KD 450W Ku and DBS-Band Antenna Mount TWTA
101 Eagle Road Building 7. Avon, Colorado. 81620.
T : (970)-748-4250.
E: info@satcomresources.com
Copyright © 2001-2018 Satcom Resources™. All rights reserved.