Xicom Technology XTD-400DBL 350W Dual Band Antenna Mount TWTA

SKU
XICO-XTD-400DBL
  • Outdoor dual band amplifier
  • No shelter required
  • Short waveguide run
  • Extended frequency bands available

Xicom Technology XTD-400DBL 350W Dual Band Antenna Mount TWTA

The Xicom Technology XTD-400DBL series are compact self-contained antenna mountable power amplifiers designed for low cost installation and long life. The XTD400DBL series design eliminates the need for an amplifier shelter as well as a long waveguide run between the amplifier and the antenna feed horn; for example, an antenna mounted 350 Watt amplifier with its shorter waveguide run will often deliver EIRP comparable to a 600 Watt rack mounted HPA. RF filters, cooling, and monitoring & control systems are all self-contained within the HPA. These features provide high reliability, low maintenance costs, and low replacement costs.

The XTD-400DBL series incorporates high efficiency, dual-stage collector TWTs. Some of the benefits of this type of TWT are: reduced prime power consumption, lower internal operating temperatures, and reliability enhancement. These benefits are obtained for both the linear and saturated modes of operation. One of the features of the XTD-400DBL series is incorporation of power factor correction circuitry that minimizes line current distortion and reduces the required volt-amps. The combination of power factor correction and high efficiency TWTs reduces input Volt-Amps by 45% when compared to equivalent amplifiers. A high frequency resonant conversion power supply is used that accepts a wide range of prime power (100 to 260 VAC). The automatic features of the power supply include quick recovery from prime power outages and multiple helix fault resets (three fault cycles). A complete monitoring & control system is built into the unit. Ten status and fault monitors are provided for external monitoring. The XTD-400DBL series can be configured for single thread, redundant, phase combined, or linearized operation. A remote external controller is available to operate the HPA from a user selected location. Mounting brackets can be supplied to mount the HPA to most popular antennas.

XTD-400DBL Key Features

  • Outdoor dual band amplifier for fixed and transportable applications
  • No shelter required
  • Short waveguide run
  • Extended frequency bands available
  • High efficiency dual-stage TWT
  • Microprocessor M&C interface
  • Optional integrated linearizer
More Information
Weight60.0000
Country of ManufactureUnited States
ManufacturerXicom Technologies
Prime FrequencyC-Band, Ku-Band
Amplifier TypeTWTA
Rated Output Power350W
Power Rating MethodPSAT
Input Frequency3.7 - 4.2 GHz, 10.95 - 12.75 GHz
LO FrequencyN/A
Output Frequency5.850 - 6.425 GHz, 14.0 - 14.5 GHz
Output InterfaceN/A
Input Power100 - 260 VAC
Power Consumption2200 VA (maximum)
Dimensions31" x 8" x 12.25"
Write Your Own Review
You're reviewing:Xicom Technology XTD-400DBL 350W Dual Band Antenna Mount TWTA
Ask a question about: Xicom Technology XTD-400DBL 350W Dual Band Antenna Mount TWTA
101 Eagle Road Building 7. Avon, Colorado. 81620.
T : (970)-748-4250.
E: info@satcomresources.com
Copyright © 2001-2018 Satcom Resources™. All rights reserved.