Teledyne Paradise Datacom R Series 6RU Rack Mount Ku-Band SSPA

$122,860.00
Out of stock
SKU
PARA-SSPA-KU.6RU
  • Ku-Band 14.00 to 14.50 GHz
  • Ext. Ku-Band 13.75 to 14.5 GHz
  • Power Output to 500W
  • Noise Figure 12 dB @ max. gain

Teledyne Paradise Datacom R Series 6RU Rack Mount Ku-Band SSPA

The Paradise Datacom Indoor High Power Rack Mount Ku-Band SSPAs represent the industry's highest power density and most reliable high power amplifier systems. These high power amplifiers are accompanied with a separate power supply chassis.

The power supply is configured as an N+1 redundant, hot swappable, power supply comprised of three modules. Only two modules are required to operate the HPA, therefore one module is redundant. In the event of a power supply module failure, the amplifier system will not fail. The module can then be changed without ever taking the HPA out of service. The microwave amplifier architecture is also designed for maximum soft fail redundancy.

The High Power Rack Mount SSPA employs a modular design, which allows quick and easy replacement in the event of a catastrophic failure of one of the SSPA components. These modular assemblies include: front and rear fan trays; and a rear panel controller card.

6RU SSPA Features

  • Extremely High Power Density:
    • 1.1 kW C-Band
    • 1000W X-Band
    • 500W Ku-Band
  • Hot Swap, N+1 Redundant Power Supply
  • Power Factor Corrected Power Supply
  • Modular (soft-fail) Architecture
  • RF Output Sample Port (-40 dB)
  • Built-in 1:1 Redundancy Control

Options

  • Extended Frequency Band
  • L-Band Input operation
  • Reflected Power Monitor
  • Ethernet Port
  • Phase Combined Systems
  • Remote Control Panel
  • RF Input Sample Port (-10 dB)
  • Rear Panel Air Intake and Exhaust

Specifications

  • SSPA Chassis housing:
    • 19.0 X 10.47 X 30.0 in
    • 483 X 266 X 762 mm
    • 180 lbs / 82 kg
  • Power Supply housing:
    • 19.0 X 5.25 X 15.44 in
    • 483 X 134 X 433 mm
    • 50 lbs / 23 kg
  • Gray powder coat finish
  • Operating temperature:
    • 0 to +50°C

L-Band Operation

Paradise Datacom offers C-, X-, and Ku-Band amplifiers with an integrated L-Band Block Up Converter. The L-Band units utilize Paradise Datacom’s proprietary ZBUC™ technology. The addition of a ZBUC to a 6RU Rack Mountable SSPA typically increases the gain by 2-4 dB. The advantages of ZBUC technology include:

  • ZBUC can detect and switch to an extenally supplied reference.
  • Optional internal high stability (10MHz) reference.
  • ZBUC can lock to an externally supplied reference of 5, 10, 20, 25, or 50 MHz without modification.
  • ZBUC can accept a wide range of external reference power (-10dBm to +5 dBm)
  • ZBUC can accept FSK monitor and control signal via the IFL for complete amplifer remote control.

Power Supply Options

The 6RU Chassis may be fitted with a variety of power supply options. The dual 1RU power supply configuration provides redundancy with all power levels; or may be used as a non -redundant supply by utilizing fewer power supply modules. The stand-alone 1RU power supply can be used to power the 750W C-Band or 400W Ku-Band chassis. The standard 3RU, three-module power supply offers redundancy for all power levels.

More Information
Weight180.0000
Country of Manufacture
ManufacturerTeledyne Paradise Datacom
Prime FrequencyKu-Band
Amplifier TypeGaAs SSPA
Rated Output Power400W, 500W
Power Rating MethodPSAT
Input Frequency950 - 1450 MHz, 950 - 1700 MHz
LO Frequency12.800 GHz, 13.050 GHz
Output Frequency13.75 - 14.5 GHz, 14.0 - 14.5 GHz
Output InterfaceWR75 Waveguide
Input Power180 - 265 VAC
Power Consumption4600W - 5100W
Dimensions19.0" x 10.47" x 30.0" (483 x 266 x 762 cm)
Write Your Own Review
You're reviewing:Teledyne Paradise Datacom R Series 6RU Rack Mount Ku-Band SSPA
101 Eagle Road Building 7. Avon, Colorado. 81620.
T : (970)-748-4250.
E: info@satcomresources.com
Copyright © 2001-2018 Satcom Resources™. All rights reserved.