Teledyne Paradise Datacom 6RU Rack Mount X-Band SSPAs
- X-Band 7.9 to 8.4 GHz
- Power Output to 1000W
- Noise Figure 12 dB @ max. gain
6RU Rack Mount X-Band SSPA
The Paradise Datacom Indoor High Power Rack Mount SSPAs represent the industry's highest power density and most reliable high power amplifier systems.
Paradise Datacom's Indoor, High Power Rack Mount (-R) series SSPAs represent the industry's highest power density and most reliable high power amplifier systems. These high power amplifiers are accompanied with a separate power supply chassis.
The power supply is configured as an N+1 redundant, hot swappable, power supply comprised of three modules. Only two modules are required to operate the HPA, therefore one module is redundant. In the event of a power supply module failure, the amplifier system will not fail. The module can then be changed without ever taking the HPA out of service. The microwave amplifier architecture is also designed for maximum soft fail redundancy.
The High Power Rack Mount SSPA employs a modular design, which allows quick and easy replacement in the event of a catastrophic failure of one of the SSPA components. These modular assemblies include: front and rear fan trays; and a rear panel controller card.
6RU SSPA Features
- Extremely High Power Density:
- 1.1 kW C-Band
- 1000W X-Band
- 500W Ku-Band
- Hot Swap, N+1 Redundant Power Supply
- Power Factor Corrected Power Supply
- Modular (soft-fail) Architecture
- RF Output Sample Port (-40 dB)
- Built-in 1:1 Redundancy Control
- Extended Frequency Band
- L-Band Input operation
- Reflected Power Monitor
- Ethernet Port
- Phase Combined Systems
- Remote Control Panel
- RF Input Sample Port (-10 dB)
- Rear Panel Air Intake and Exhaust
- SSPA Chassis housing:
- 19.0 X 10.47 X 30.0 in
- 483 X 266 X 762 mm
- 180 lbs / 82 kg
- Power Supply housing:
- 19.0 X 5.25 X 15.44 in
- 483 X 134 X 433 mm
- 50 lbs / 23 kg
- Gray powder coat finish
- Operating temperature:
- 0 to +50°C
Paradise Datacom offers C-, X-, and Ku-Band amplifiers with an integrated L-Band Block Up Converter. The L-Band units utilize Paradise Datacom’s proprietary ZBUC™ technology. The addition of a ZBUC to a 6RU Rack Mountable SSPA typically increases the gain by 2-4 dB. The advantages of ZBUC technology include:
- ZBUC can detect and switch to an extenally supplied reference.
- Optional internal high stability (10MHz) reference.
- ZBUC can lock to an externally supplied reference of 5, 10, 20, 25, or 50 MHz without modification.
- ZBUC can accept a wide range of external reference power (-10dBm to +5 dBm)
- ZBUC can accept FSK monitor and control signal via the IFL for complete amplifer remote control.
Power Supply Options
The 6RU Chassis may be fitted with a variety of power supply options. The dual 1RU power supply configuration provides redundancy with all power levels; or may be used as a non -redundant supply by utilizing fewer power supply modules. The stand-alone 1RU power supply can be used to power the 750W C-Band or 400W Ku-Band chassis. The standard 3RU, three-module power supply offers redundancy for all power levels.
|Country of Manufacture|
|Manufacturer||Teledyne Paradise Datacom|
|Amplifier Type||GaAs SSPA|
|Rated Output Power||700W, 1000W|
|Power Rating Method||PSAT|
|Input Frequency||950 - 1450 MHz|
|LO Frequency||6.950 GHz|
|Output Frequency||7.9 - 8.4 GHz|
|Output Interface||WR112 Waveguide|
|Input Power||180 - 265 VAC|
|Dimensions||19.0" X 10.47" X 30.0" (483 X 266 X 762 cm)|