Comtech EF Data LPODK Ku-Band Block Upconverter
- 16W - 100W P1dB Output Power
- 3 Frequency Band Options
- Optional Integrated Receive LNB
- Optional 1:1 Redundant Configurations
- 100-240 VAC or -48 VDC Power Options
Comtech EF Data LPODK Ku-Band Block Up Converter (BUC) / SSPA
Comtech EF Data’s extensive experience in the design of outdoor RF transceivers led to the LPOD family’s efficient thermal and mechanical package. Recognizing the evolution of L-Band IF systems, the LPOD is designed to eliminate the traditional requirement for the modem to supply a DC power source and a 10 MHz reference to the BUCs and LNBs. The LPOD’s optional internal reference and LNB bias T greatly simplify multi-carrier operation and provide cost-effective redundant solutions. The LPOD offers valuable features not found in other L-Band BUC products. The PS2 model can be configured as an integrated BUC/SSPA (L-Band in, RF out) or solely as an SSPA (RF in, RF out) at power levels to 250 W (The PS1 and PS1.5 models are always configured as a BUC/SSPA with available power levels to 100 W.)
Optional Internal 10 MHZ Reference
With the optional high-stability, ovenized reference oscillator (OCXO) installed, one more signal is removed from the TX IF cable. This ensures optimum RF performance of the BUC by eliminating any reference degradation caused by IF combiners, interconnections or rotary joints.
Optional LNB Support
The LPOD was designed with the evolution of L-Band systems in mind. No longer relegated to low power single carrier installations, L-Band IF topologies are now found in larger multi-carrier installations. A challenge presented by multi-carrier L-Band systems is the presence of DC and reference components on the TX/RX L-Band interfaces. The LPOD design, by default, eliminates the DC component from the TX IF and can eliminate the reference requirement with the optional internal OCXO. The LNB bias/reference option completes the solution by eliminating DC and reference signal requirements from the RX L-Band interface.
Another challenge addressed by the LPOD topology is the increasing need for redundant L-Band RF solutions. With its internal power supply, internal reference and internal LNB bias capability, the LPOD offers a very cost-effective solution for 1:1 redundant TX and 1:1 redundant RX requirements.
Integrated Power Supply
All LPOD models have a self-contained power supply. This eliminates the requirement for the modem to supply the BUC voltage on the center conductor of the RF cable, simplifying multi-carrier operation and modem spares maintenance.
Data Logging Capability
To greatly enhance system maintainability, the LPOD line includes a built in data logging capability. By recording critical operational parameters (such as temperature, output power, mute status, etc.) at time stamped intervals, the user can quickly gather intelligence not only about the unit itself, but also the unit’s operational environment.
The LPOD, when used with Comtech EF Data modems, provides valuable additional functionality utilizing the industry standard FSK communications channel. This feature offers full control of single thread and redundant systems from the modem front panel without additional cabling or cost. The LPOD can also be accessed from the Ethernet port of the modem and controlled via Embedded Distant-end Monitor and Control (EDMAC).
Hand-Held Controller Devices
A variety of hand-held controller devices are available. These include the LPODnet M&C Accessory Kit and the CLC-10 M&C Accessory Kit. Both are designed to access the monitor and control functionality of the LPOD family of products.
|Country of Manufacture||United States|
|Manufacturer||Comtech EF Data|
|Amplifier Type||GaAs SSPA|
|Rated Output Power||16W, 25W, 32W, 40W, 50W, 80W, 100W|
|Power Rating Method||P1dB|
|Input Frequency||950 - 1450 MHz, 950 - 1750 MHz|
|Output Frequency||12.75 - 13.25 GHz, 13.75 - 14.5 GHz, 14.0 - 14.5 GHz|
|Output Interface||WR75 Waveguide|
|Input Power||-48VDC, 90 - 264 VAC|
|Power Consumption||75 W nominal|
|Dimensions||PS1,1.5 17 lbs Nominal / 7.37” x 6.26” x 12.65” PS2 47 lbs Nominal / 9.78” x 8.80” x 16.81”|