AnaCom mBUC 4W - 40W Ku-Band Block Upconverter (BUC)

  • Available Frequency Bands Ku, EKu and SEKu
  • No indoor equipment is needed
  • Superior phase noise
  • Flexible, universal DC power supply (AC optional)
Out of stock

AnaCom mBUC 4W - 40W Ku-Band Block Upconverter (BUC)

AnaCom's smaller-sized mBUCs provide the high output power and high reliability of an AnaCom BUC in a compact package suited for use with most mobile and fly-away antennas. mBUCs are designed for continuous outdoor duty in all types of harsh environments. Ideally suited for SCPC, MCPC, DAMA, TDMA, and VoIP applications and designed to interface with any L-band modem, the mBUC may be used in a wide variety of communication networks.

AnaCom's mBUC features web-based and command-line access to Monitor and Control functions accessible via Ethernet, FSK, Telnet, RS-232- and RS-485, and device monitoring over SNMP.

mBUC Features

  • Built in test facilities for improved maintainability and reduced dependence on external test equipment
  • No indoor equipment is needed
  • Superior phase noise
  • Flexible, universal DC power supply (AC optional)

Built In Test Capability

To improve and simplify maintenance routines, an external terminal (or computer) can be connected to monitor a number of critical parameters without use of additional test equipment. These include:

  • Transmitter power output level
  • TX IF level
  • Power supply voltages
  • TX synthesizer loop voltages
  • Internal Temperature
  • Alarm Details

Controllable functions from the terminal include:

  • TX On/Off
  • TX Gain

mBUC Benefits

  • “Last Touch” controls allow for remote configuration or local (manual) configuration
  • Flash memory means that the mBUC always powers up with exactly the same operating conditions as when it lost power (or was shut down)
  • Comprehensive maintenance features for operational effectiveness and minimum outages.
  • Simple installation.

Comprehensive Monitor & Control

The mBUC's Monitor & Control feature allows you to monitor and control the mBUC on the same M&C bus with most indoor equipment such as modems and multiplexers. The Monitor & Control system can be used in combination with the unit’s internal metering function to monitor operational parameters.

The M&C can be accessed remotely via-
Ethernet protocols:

  • Internal Webpage
  • Telnet
  • SNMP
  • AnaCom Supervisor 10

Serial protocols:

  • RS-232
  • RS-485
  • AnaCom Supervisor 10

Compact, Functional Design

The upconverter, power amplifier, monitor and control and power supply are included in a single enclosure. The only cabling required to the indoor equipment are IF and power. An optional ovenized, high stability crystal oscillator can be used to lock the TX synthesizer. Additional temperature and aging compensation are provided by an onboard microprocessor.

More Information
Weight 13.0000
Country of Manufacture United States
Manufacturer Anacom
Prime Frequency Ku-Band
Amplifier Type GaAs SSPA
Rated Output Power 4W, 8W, 16W, 20W, 25W, 32W, 40W
Power Rating Method P1dB
Input Frequency 950 - 1450 MHz, 950 - 1700 MHz
LO Frequency 12.800 GHz, 13.050 GHz
Output Frequency 13.75 - 14.25 GHz, 13.75 - 14.5 GHz, 14.0 - 14.5 GHz
Input Power 24 VDC, 48 VDC
Power Consumption 4W 45 VA, 8W 111 VA, 16W 183 VA, 20W 230 VA, 25W 237 VA, 32W 254 VA, 40W 360 VA
Dimensions 10.95" x 7.08" x 4"
Write Your Own Review
You're reviewing:AnaCom mBUC 4W - 40W Ku-Band Block Upconverter (BUC)
101 Eagle Road Building 7. Avon, Colorado. 81620.
T : (970)-748-4250.