AnaCom ELSAT 1mW - 200W XKu-Band Block Upconverters (BUC)

Out of stock
SKU
ANAC-ELSAT-XKu-1mW-200W
  • Tx Frequency Range 12.75 - 13.25 GHz
  • No indoor equipment is needed
  • Frequency agile radio equipment.
  • Superior phase noise

AnaCom ELSAT 1mW - 200W XKu-Band Block Upconverters (BUC)

AnaCom's series of XKu-Band ELSAT Block-Upconverters (BUCs) are available in transmitter output levels up to 200 Watts in single or redundant configurations. These BUCs are ruggedly built for continuous outdoor duty in all types of environments. They are especially suitable for SCPC, MCPC, and DAMA applications.

The upconverter, power amplifier, monitor and control and power supply are included in a single enclosure and the only cabling required to the indoor equipment are IF cables. An ovenized, high stability crystal oscillator is used to lock the TX synthesizer. Additional temperature and aging compensation are provided by an onboard microprocessor.

XKu-Band ELSAT Features

  • Built in test facilities for improved maintainability and reduced dependence on external test equipment
  • No indoor equipment is needed
  • Frequency agile radio equipment.
  • Superior phase noise
  • Flexible, universal power supply

Built In Test Equipment

To improve and simplify maintenance routines, an external terminal (or computer) can be connected to monitor a number of critical parameters without use of additional test equipment. These include:

  • Transmitter power output level
  • TX IF level
  • Power supply voltages
  • TX synthesizer loop voltages
  • Internal Temperature
  • Alarm Details

Controllable functions from the terminal include:

  • TX frequency and gain (ON/OFF feature)

ELSAT Benefits

  • “Last Touch” controls allow for remote configuration or local (manual) configuration
  • Flash memory means that the BUC always powers up with exactly the same operating conditions as when it lost power (or was turned off)
  • Comprehensive maintenance features for operational effectiveness and minimum outages.
  • Simple installation.

Comprehensive Monitor & Control

The ELSAT BUC's Monitor & Control feature allows you to monitor and control the BUC on the same M&C bus with most indoor equipment such as modems and multiplexers. The Monitor & Control system can be used in combination with the unit’s internal metering function to monitor operational parameters.

The M&C can be accessed remotely via-
Ethernet protocols:

  • Internal Webpage
  • Telnet
  • SNMP
  • AnaCom Supervisor 10

Serial protocols:

  • RS-232
  • RS-485
  • AnaCom Supervisor 10

Compact, Functional Design

The upconverter, power amplifier, monitor and control and power supply are included in a single enclosure. The only cabling required to the indoor equipment are IF and power. An optional ovenized, high stability crystal oscillator can be used to lock the TX synthesizer. Additional temperature and aging compensation are provided by an onboard microprocessor.

More Information
Country of ManufactureUnited States
ManufacturerAnacom
Prime FrequencyKu-Band
Amplifier TypeGaAs SSPA
Rated Output Power1mW, 2W, 4W, 8W, 16W, 20W, 25W, 30W, 40W, 50W, 80W, 100W, 125W, 150W, 200W
Power Rating MethodP1dB
Input Frequency950 - 1450 MHz
LO Frequency11.8 GHz
Output Frequency12.75 - 13.25 GHz
Input Power100 - 250 VAC, 48 VDC
Power Consumption1mW 20 VA, 2W 41 VA, 4W 51 VA, 8W 91 VA, 16W 189 VA, 20W 200 VA, 25W 256 VA, 30W 266 VA, 40W 372 VA, 50W 392 VA, 80W 1430 VA, 100W 1600 VA, 125W 1640 VA, 150W 2900 VA, 200W 3087 VA
Dimensions48 VDC 1mW - 8W 15.3" x 6.25" x 6.1", 16W - 30W 15.3" x 6.39" 7.9", 40W - 50W 15.3" x 6.39" x 9.3", 80W - 200W 38" x 12.75" x 12.9"
Write Your Own Review
You're reviewing:AnaCom ELSAT 1mW - 200W XKu-Band Block Upconverters (BUC)
101 Eagle Road Building 7. Avon, Colorado. 81620.
T : (970)-748-4250.
E: info@satcomresources.com
Copyright © 2001-2018 Satcom Resources™. All rights reserved.