AnaCom AnaSat 0W - 400W C-Band VSAT Transceivers

Out of stock
SKU
ANAC-AnaSat-C-0-400W
  • Comprehensive C-Band Coverage
  • No indoor equipment is needed
  • Frequency agile radio equipment.
  • LNA configuration available

AnaCom AnaSat 0W - 400W C-Band VSAT Transceivers

AnaCom's series of C-Band VSAT transceivers are available in transmitter output levels up to 400 Watts, in single or redundant configurations. These transceivers are ruggedly built for continuous outdoor duty in all types of environments. They are especially suitable for SCPC, MCPC, and DAMA applications.

The upconverter, downconverter, power amplifier, monitor and control and power supply are included in a single enclosure and the only cabling required to the indoor equipment are IF cables. The LNC connects to the transceiver with a single coaxial cable. An ovenized, high stability crystal oscillator is used to lock the TX and RX synthesizers. Additional temperature and aging compensation are provided by the onboard microprocessor. An LNA configuration is also available.

C-Band AnaSat Transceiver Features

  • Built in test facilities for improved maintainability and reduced dependence on external test equipment
  • No indoor equipment is needed
  • Frequency agile radio equipment.
  • Completely independent TX and RX frequency selection
  • Superior phase noise
  • Flexible, universal power supply
  • LNA configuration available

Built in Test Equipment

To improve and simplify maintenance routines, an external terminal (or computer) can be connected to monitor a number of critical parameters without use of additional test equipment. These include:

  • Transmitter power output level
  • TX and RX IF level
  • Power supply voltages
  • TX and RX synthesizer loop voltages
  • Internal Temperature
  • Alarm Details

Controllable functions from the terminal include:

  • TX frequency and gain (ON/OFF feature)
  • RX frequency and gain (independent from TX)

Benefits

  • “Last Touch” controls allow for remote configuration or local (manual) configuration
  • Flash memory means that the transceiver always powers up with exactly the same operating conditions as when it lost power (or was turned off)
  • Comprehensive maintenance features for operational effectiveness and minimum outages.
  • Simple installation.

Comprehensive Monitor & Control

A powerful Monitor & Control feature allows you to monitor and control the transceiver on the same M&C bus with most indoor equipment such as modems and multiplexers. The Monitor & Control system can be used in combination with the unit’s internal metering function to monitor operational parameters.

The M&C can be accessed remotely via-
Ethernet protocols:

  • Internal Webpage
  • Telnet
  • SNMP
  • AnaCom Supervisor 10

Serial Protocols:

  • RS-232
  • RS-485
  • AnaCom Supervisor 10

Compact, Functional Design

The upconverter, power amplifier, monitor and control and power supply are included in a single enclosure. The only cabling required to the indoor equipment are IF and power. An optional ovenized, high stability crystal oscillator can be used to lock the TX synthesizer. Additional temperature and aging compensation are provided by an onboard microprocessor.

More Information
Country of ManufactureUnited States
ManufacturerAnacom
Prime FrequencyC-Band
Amplifier TypeGaAs SSPA
Rated Output Power2W, 5W, 10W, 20W, 30W, 40W, 50W, 60W, 70W, 80W, 100W, 125W, 150W, 180W, 200W, 300W, 350W, 400W
Power Rating MethodP1dB
Input Frequency3.375 - 3.950 GHz, 3.400 - 3.640 GHz, 3.4 - 4.2 GHz, 3.625 - 4.20 GHz, 3.650 - 4.150 GHz, 4.5 - 4.8 GHz
Output Frequency5.725 - 6.425 GHz, 5.850 - 6.425 GHz, 5.85 - 6.725 GHz, 5.975 - 6.475 GHz, 6.425 - 6.725 GHz, 6.725 - 7.025 GHz
Input Power100 - 250 VAC, 48 VDC
Power Consumption0W 41 VA, 2W 73 VA, 5W 83 VA, 10W 125 VA, 20W 229 VA, 30W 280 VA, 40W 390 VA, 50W 394 VA, 60W 398 VA, 70W 570 VA, 80W 572 VA, 100W 762 VA, 125W 1179 VA, 150W 1179 VA, 180W 1539 VA, 200W 1539 VA, 300W 2832 VA, 350W 2832 VA, 400W 2832 VA
Dimensions0W 21.6 x 9.0 x 6 in., 2 - 5W 21.6 x 9.0 x 7 in., 10W 21.6 x 9.0 x 6 in., 20 - 30W 21.6 x 9.0 x 10.3 in., 40W 21.6 x 9.0 x 11.4 in., 50 - 60W 21.6 x 9.0 x 12.5 in., 70 - 100W 21.6 x 13.0 x 11.2 in., 125 - 200W 34.5 x 12.75 x 12.4 in.
Write Your Own Review
You're reviewing:AnaCom AnaSat 0W - 400W C-Band VSAT Transceivers
101 Eagle Road Building 7. Avon, Colorado. 81620.
T : (970)-748-4250.
E: info@satcomresources.com
Copyright © 2001-2018 Satcom Resources™. All rights reserved.