AnaCom AnaSat 0W - 200W Ku-Band VSAT Transceivers
- Built in test facilities for improved maintainability
- No indoor equipment is needed
- Frequency agile radio equipment.
- Completely independent TX and RX frequency selection
AnaCom AnaSat 0W - 200W Ku-Band VSAT Transceivers
AnaCom's series of Ku-Band VSAT transceivers are available in transmitter output levels up to 200 Watts, in single or redundant configurations. These transceivers are ruggedly built for continuous outdoor duty in all types of environments. They are especially suitable for SCPC, MCPC, and DAMA applications.
The upconverter, downconverter, power amplifier, monitor and control and power supply are included in a single enclosure and the only cabling required to the indoor equipment are IF cables. The LNC connects to the transceiver with a single coaxial cable. An ovenized, high stability crystal oscillator is used to lock the TX and RX synthesizers. Additional temperature and aging compensation are provided by the onboard microprocessor. An LNA configuration is also available.
Ku-Band AnaSat Transceiver Features
- Built in test facilities for improved maintainability and reduced dependence on external test equipment
- No indoor equipment is needed
- Frequency agile radio equipment.
- Completely independent TX and RX frequency selection
- Superior phase noise
- Flexible, universal power supply
- LNA configuration available
Built in Test Equipment
To improve and simplify maintenance routines, an external terminal (or computer) can be connected to monitor a number of critical parameters without use of additional test equipment. These include:
- Transmitter power output level
- TX and RX IF level
- Power supply voltages
- TX and RX synthesizer loop voltages
- Internal Temperature
- Alarm Details
Controllable functions from the terminal include:
- TX frequency and gain (ON/OFF feature)
- RX frequency and gain (independent from TX)
Benefits
- “Last Touch” controls allow for remote configuration or local (manual) configuration
- Flash memory means that the transceiver always powers up with exactly the same operating conditions as when it lost power (or was turned off)
- Comprehensive maintenance features for operational effectiveness and minimum outages.
- Simple installation.
Comprehensive Monitor & Control
A powerful Monitor & Control feature allows you to monitor and control the transceiver on the same M&C bus with most indoor equipment such as modems and multiplexers. The Monitor & Control system can be used in combination with the unit’s internal metering function to monitor operational parameters.
The M&C can be accessed remotely via-
Ethernet protocols:
- Internal Webpage
- Telnet
- SNMP
- AnaCom Supervisor 10
Serial Protocols:
- RS-232
- RS-485
- AnaCom Supervisor 10
Compact, Functional Design
The upconverter, power amplifier, monitor and control and power supply are included in a single enclosure. The only cabling required to the indoor equipment are IF and power. An optional ovenized, high stability crystal oscillator can be used to lock the TX synthesizer. Additional temperature and aging compensation are provided by an onboard microprocessor.
Country of Manufacture | United States |
---|---|
Manufacturer | Anacom |
Prime Frequency | Ku-Band |
Amplifier Type | GaAs SSPA |
Rated Output Power | 0W, 2W, 4W, 8W, 16W, 20W, 23W, 25W, 32W, 40W, 50W, 60W, 80W, 100W, 125W, 150W, 200W |
Power Rating Method | P1dB |
Input Frequency | 10.95 - 12.75 GHz |
Output Frequency | 13.75 - 14.25 GHz, 13.75 - 14.5 GHz, 14.0 - 14.5 GHz |
Input Power | 100 - 250 VAC, 48 VDC |
Power Consumption | 0W 40 VA, 2W 60 VA, 4W 100 VA, 8W 160 VA, 16W 270 VA, 20W 294 VA, 23W 300 VA, 25W 300 VA, 32W 340 VA, 40W 770 VA, 50W 800 VA, 60W 850 VA, 80W 1430 VA, 100W 1600 VA, 125W 1640 VA, 150W 2900 VA, 200W 3010 VA |
Dimensions | 0W - 4W 21.6” x 9.0” x 7”, 8W 21.6” x 9.0” x 9.4", 16W - 25W 21.6” x 9.0” x 10.8", 32W 21.6” x 9.0” x 12.5", 40W - 60W 21.6” x 13” x 11.2”, 80W - 200W 38.0" x 12.75" x 12.4" |