• Home
  • TANDBERG EN5980 HD Encoder for SMPTE VC-1/WM9 Series

TANDBERG EN5980 HD Encoder for SMPTE VC-1/WM9 Series

(0) No Reviews yet
  • Media9 real-time video encoding
  • Extensive video pre-processing
  • Stereo Audio encoding
  • HDSDI video input


VideoHSYNC support for 625 and 525 line

Audio (MPEG Layer II or Dolby AC-3)Analogue input levels: 12, 15, 18, 21, 22 and 24dB

2 x AES/EBU digital audio inputs

Up to 8 stereo audio channels can be extracted from SDI / HD SDI

Input levels: 12, 15, 18, 21, 22 and 24dB

2 x analogue audio?s balanced 600 ohms/20k ohm

Sampling rates of 32kHz & 48Hz
Advanced Audio (AAC or WMA)Up to 16 audio channels (8 stereo) can be extracted from HD SDI

Sampling rate of 48kHz
3 x ASI copper Single Programme Transport Stream

2 x 10/100/1000baseT Ethernet (ASF Multicast)

MPEGTS over IP, including FEC as per DVB IPI (option)
Video Encoder
Windows Media 9 SeriesAdvanced Profile level 3

2.5 to 25 Mbit/s
Audio Encoder
MPEG Layer II up to 2 stereo pairs

Dolby Digital® (AC-3) up to 2 stereo pairs

Dolby Digital® (AC-3) 1 - 5.1 channel, Dolby-E, linear PCM pass-through

WMAPRO up to 4 stereo pairs

WMAPRO 5.1 & 7.1 encoding (option)

AAC and aacPlus up to 4 stereo pairs (option)

AAC and aacPlus 5.1 (option)
EIA-708 Closed caption insertion via RS-232 (SMPTE 333) or via HDSDI (SMPTE 334)

Time Code from VITC in HD SDI
Advanced Pre-Processing
TANDBERG Spatio & temporal noise reduction (option)

Frame re-synchronisation
Supported HD Resolutions
1080 x 1920/1440/1280/960pSF 23.976

1080 x 1920/1440/1280/960pSF 24

1080 x 1920/1440/1280/960i 25

1080 x 1920/1440/1280/960i 29.97

1080 x 1920/1440/1280/960i 30

720 x 1280/960/640p 50

720 x 1280/960/640p 59.94

720 x 1280/960/640p 60

720 x 1280/960/640p 24

Web browser interface

Front panel LCD with quick access keys and alpha numeric keypad

nCompass Device Control (formerly TDC) supported via dual Ethernet.
Power & Dimensions
Dimensions (W x H x D)442.5 x 88.9 x 499.5 mm
Weight12 kg
Power Input100 - 120 VAC / 220 - 240 VAC wide ranging auto sensing
Consumption150W nominal
Operating Temperature-10°C to 50°C (14°F to 122°F)
CE marked in accordance with EEC low voltage and EMC directives EN55022, EN55024: 1998, EN61000-3- 2 for EMC and the EN/IEC60950 Safety Standard as a minimum where applicable.

Also meets other relevant requirements and national standards derived from international requirements on which the above European Standards are based and FCC Pt 15 Class A.

Ratings & Reviews

No reviews available

Be the first to Write a Review