• Home
  • GD Satcom SPCD6200R 200W C-Band Rack-mount SSPA




GD Satcom SPCD6200R 200W C-Band Rack-mount SSPA

(0) No Reviews yet
  • C-Band 5.850 to 6.425 GHz
  • 159 W output @P1dB
  • Type N input
  • Integral 1:1 redundancy control


SKU:

SPCD/SPCM6200R Specifications
Frequency Range

    Band "D"

    Band "M"


5.850 - 6.425 GHz

5.850 - 6.725 GHz
Gain, at maximum gain setting (standard) 70 dB
Gain Adjust Range (Digital, 0.1 dB steps) 20 dB
Gain Flatness

    Full band

    Per 40 MHz


±0.75 dB

±0.3 dB
Saturated Power Output +53 dBm (200 W)
Power Output at 1 dB compression (P1 dB) +52 dBm (159 W)
Two-tone Intermodulation At 3 dB total backoff from 1 dB compression point -30 dBc
Group Delay

    Linear

    Parabolic

    Ripple


0.03 ns/MHz

0.003 ns/MHz²

1.0 ns p-p
AM/PM Conversion At P1dB/sub> 2.5 - 3.5 °/dB
Noise Figure (at maximum Gain)8 dB
VSWR

    Input

    Output


1.25 - 1.30 :1

1.20 - 1.30 :1
Front Panel Sample Ports

    Input

    Output


-10 dB

-40 dB
Connectors
Input Type N Female
Output CPR137G Waveguide
Sample Ports Type N Female
Serial I/O 9-pos D-sub Female, mate supplied
Parallel I/O 25-pos D-sub Male, mate supplied
Power4-pos CE05
System 15-pos D-sub, Male
Network RJ-45 Jack
Power Requirements
Voltage 90–135 or 180–270 Vac
Frequency 47 - 63 Hz
Power 500 - 600 W (Cold start, at 0 °C and Pout in saturation.))
Power factor corrected 0.99
Cooling System Forced air. Intake on front panel.
Operating Temperature Range 0 to +50°C
Dimensions (H x W x D) 7 x 19 x 24 inches

(178 x 483 x 610 mm)

Ratings & Reviews

No reviews available

Be the first to Write a Review