Paradise Datacom CRM Series 4RU Rack Mount C-Band SSPAs
- C-Band 5.850 to 6.425 GHz
- Ext. C-Band 5.850 to 6.725 GHz or
- Ext. C-Band 5.75 to 6.67 GHz
- Output Power to 600W
4RU Compact Rack Mount SSPAs
The Paradise Datacom 4RU Indoor Rack Mount Series SSPA represent the latest in High Power Microwave Amplifier Technology.
The SSPA chassis achieves the highest power density in the industry along with enhanced maintainability.
Local, front panel, control is available with a user friendly interface. Five fault condition LEDs on left side of the front panel reflect some of the SSPA major faults states, plus a summary fault indicator. The SSPA online LED turns green when the amplifier is in Online mode (1:1 Mode) or serves as an AC power indicator in standalone mode. Local/Remote and Mute/Unmute LEDs show the current control mode and mute state of the amplifier.
A full compliment of serial and parallel (contact closure) control is also available from the rear panel. Paradise Datacom's WindowsTM-based Universal M&C software allows monitor and control of the SSPA from a remote computer.
A state of the art thermal platform provides efficient cooling for the amplifier module and power supplies. This ensures the highest possible MTBFs for microwave power amplifiers.
Along with high reliability comes the ultimate in amplifier maintainability. Amplifier modules and power supplies are easily accessed making this one of the easiest amplifier assemblies to maintain in the field.
Redundant Power Supply Option
The combination of a separate +12 VDC output, fully redundant power supply is an excellent means of obtaining the ultimate system reliability.
The power supply is an N+1 redundant configuration meaning that there is one more power supply module available than is required to operate the SSPA. A failure of one power supply module will not take the amplifier off-the-air.
In addition the power supply modules are removable from the front panel while in operation. There is never a need to remove the power supply chassis from the equipment rack. Weighing only 9 lbs. (4 kg) and occupying only 1 rack unit of cabinet space, the redundant power supply chassis is an excellent companion to the SSPA chassis.
The power supply has a single phase, universal AC input ranging from 90-265 VAC, 47-63 Hz. It is power factor corrected to 0.99. Depending on the power requirements of the SSPA, the power supply is configured with two, three or four 1200W hot-swappable modules, each of which weighs 5 lbs. (2.3 kg).
|4RU SSPA Common Electrical Specifications|
|Gain (minimum)||75 dB|
|Gain Flatness (full band)||±1.0 dB|
|Gain Slope |
per 40 MHz (C, X, Ku)
per 10 MHz (S-band)
±0.3 dB/40 MHz
±0.1 dB/10 MHz
|Gain Variation vs. Temperature||0°C TO +50°C ±1.0 dB|
|Gain Adjustment (0.1 dB resolution)||20 dB|
(3dB back off relative to P1dB)
@ rated P1dB
|Spurious @ rated P1dB||-70 dBc|
@ rated P1dB-3dB (C, X, Ku)
@ rated P1dB-3dB (S-Band)
|Noise Figure at maximum gain||12 dB|
1.0 ns p-p
TX Band (S, C-, X- or Ku-Band
RX Band (C- or Ku-Band)
Rx Band (X-Band)
-75 dBW/4 KHz
-150 dBW/4 KHz
-100 dBW/4 KHz
|Residual AM Noise|
0 - 10 KHz
10 KHz - 500 KHz
500 KHz - 1 MHz
-20 dBc(1.25 + log F)
|Residual Phase Noise |
(Offset freq. from carrier)
|Dimensions (W x H x D)||19.0 x 7.0 x 28.0 inches|
483 x 178 x 711 mm
100 (45) lbs.(kg)
|Operating Temperature||0 to +50° C Ambient|
|Relative Humidity||95% non-condensing|
|Cooling System||Integrated Forced air|
|See Datasheet for C-Band Specifications|
- Paradise Datacom 4RU Rack Mount SSPA Datasheet
- Paradise Datacom 4RU Rack Mount SSPA Operation Manual
- Paradise Datacom RCP2-1000-RM Remote Control Panel for Rack Mount SSPAs
- Paradise Datacom Redundant Indoor Packaged SSPAs
- Paradise Datacom Phase Combined Indoor Rackmount SSPA Packages
- Paradise RCP2/FPRC Redundant System Controllers
- Paradise RCPD-1100-LX Redundant Control Panel for Dual 1:1 Systems
- Paradise RCPD-1100-LX Control Panel Operations Manual
- Paradise RCP2/FPRC Redundant System Controller Operations Manual