• Home
  • Newtec Horizon Series HZ920 Satellite Receiver for DVB-T/H Networks

Newtec Horizon Series HZ920 Satellite Receiver for DVB-T/H Networks

(0) No Reviews yet
  • Compliant with DVB-S2 and DVB-S/DSNG
  • Compliant with DVB-T and DVB-H
  • Multistream operation
  • Easy installation and maintenance


Demodulator Part
Max baudrates
  • DVB-S2 0,256 - 30 Mbaud (optional up to 45Mbaud))
  • DVB-S/DSNG 1- 30 Mbaud (45 Mbaud option)
Supported modcods
DVB-S2 QPSK, 8PSK, 16APSK (option)
DVB-S/DSNG QPSK, 8PSK, 16QAM (option)
Roll-off factor
20% - 25% - 35%
L-band input: dual input
  • frequency range 950-2150 MHz
  • return loss > 79 dB (75 Ohm-MCX(F))
  • level signal -25 to -65dBm + 10 log(f) f= Baudrate in Mbaud
  • adjacent signal <(Co+7) dBm/Hz, Co=signal level density
LNB power and control
  • max. current: 350 mA (on selected L-band input)
  • 11.5-14 V (vertical), 16-19 V (horizontal), 22 KHz ± 4 kHz ,DiSEqC
Multistream operation
  • Compliant with DVB-S2 Multistream CCM or VCM (Optional)
  • Extraction of one stream on ASI output
  • This feature is only available in DVB-S2 mode.
Data Interfaces
  • 1 ASI output with the stream produced by the local drop module
Local Drop
  • Processing of one multiplex per unit
  • PID selection and filtering
  • TS bit rate adaptation
  • SI/PSI table, delta and Time-slicing regeneration
  • SFN synchronization
Monitor and control interfaces
a) Web server GUI (HTTP) via web browser interface: Ethernet 10base-T on RJ-45
b) RMCP version 2 interface: 9-pins SUB-D Female
c) RMCP v2 (TCP/IP) and SNMP (UDP) interface: Ethernet 10base-T on RJ-45
Alarm interface
9-pins SUB-D Female interface
Output: Generic device and Interface alarms
Input: separate reset and output muting control
1RU, width 19", depth 15.3", 5kg
Power Supply 90-130 and 180-260 Vac, 80VA



5°C to +35°C

-40°C to +70°C
Humidity 5% to 85% non-condensing
CE Label

Ratings & Reviews

No reviews available

Be the first to Write a Review