• Home
  • Newtec AZ120 Telco Satellite Modulator




Newtec AZ120 Telco Satellite Modulator

(0) No Reviews yet
  • DVB-S2 and DVB-DSNG/S compliant
  • QPSK, 8PSK, 16APSK and 32APSK
  • L-Band monitoring output
  • Optional integrated RF upconverter


SKU:

Input Interface
G.703 input
Rate 2.048 ; 6.312 ; 8.448; 34.368 ; 44.736 Mbit/s
Connector BNC (F)
Impedance 75 ohms
Clock stability - G703
2 Mbit/s ± 50 ppm
6 & 8 Mbit/s ± 30 ppm
34 & 44 Mbit/s ± 20 ppm
Line coding
Fully compliant to the ITU-T G.703 standard HDB3 for E1, E2, and E3 B3ZS for DS-3 (T3)
Adaptive equalizer with 4 preset values, compensating cable lengths up to 1350ft
Modulation
Supported modulation schemes and FEC
DVB-S/DSNG Outer/Inner FEC: Reed Solomon / Viterbi
MODCODs QPSK:1/2, 2/3, 3/4, 5/6, 7/8

8PSK: 2/3, 5/6, 8/9

16QAM: 3/4, 7/8
DVB-S2 Outer/Inner FEC: BCH/ LDPC
MODCODS QPSK: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5,5/6, 8/9, 9/10

8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10

16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, 9/10

32APSK: 3/4, 4/5, 5/6, 8/9, 9/10
Baud rate range
DVB-S2 50 kBaud – 45 Mbaud
DVB-S/DSNG 50 kBaud – 45 Mbaud
Frame length
DVB-S/DSNG 188 bytes
DVB-S2 Short Frames 16200 bits
DVB-S2 Normal Frames 64800 bits
Roll-off factor
20 % - 25% -35%
Output Interfaces
L-band output (default)
Connector SMA (F), 50 ohms
Return loss > 10 dB
Level -50/-7 dBm (+/- 2dB)
Frequency 950 - 1750 MHz (50 Hz steps)
IF-band (optional)
Connector BNC (F) - 75 ohms (intermateable with 50 ohms)
Return loss 50 ohms : > 14 dB

75 ohms : > 20 dB
Level -30/+5 dBm (± 3 dB)
Frequency 50 - 180 MHz (50 Hz steps)
L-band + IF (optional)
L-band same as above
IF fixed 70 or 140 MHz frequency -34/+1 dBm (+/- 3 dB) output level
RF band (optional)
Connector SMA (F), 50 ohms
Return loss > 12 dB
Frequencies 5.85-6.65 GHz

12.75-13.25 GHz

13.75-14.5 GHz
Level -50/-7 dBm (+/- 3dB)
Frequencies 17.30-18.10 GHz

17.60-18.40 GHz
Level -40/+3 dBm (+/- 3dB)
L-band monitoring output (default)
Connector SMA (F), 50 ohms
Return loss > 7 dB
Frequency default: identical to L-band output. with options AA-02 / AA-06: 1080 MHz
Level -45 dBm
BUC power and reference frequency (optional)
Max. current 1.5 A
Voltage 24V
Frequency 10MHz
Stability ±5x10-8 over 0°C to 65°C
Spurious performance
better than -65 dBc/4 kHz @ -10 dBm level and > 256 kbaud
10 MHz reference input / output (optional)
Connector BNC (F) – 50 ohms
Input level -3dbm up to 7dBm
Output level +7dBm
Internal Reference Frequency
High Stability (optional) Stability ±5x10-8 over 0°C to 70°C

Ageing: ± 15 ppb/day

± 300 ppb/year
Very High Stability (optional) Stability ±2x10-9 over 0°C to 65°C

Ageing: ± 0.5 ppb/day

± 500 ppb/10 year
Generic
Monitor and control interfaces
Web based GUI
Diagnostics report, alarm log
RMCP over TCP-IP/UDP and RS232/RS485
SNMP v2c
Alarm interface
Electrical dual contact closure alarm contacts
Connector 9-pin sub-D (F)
Logical interface and general device alarm
Physical
1RU, width 19”, depth 51 cm, 6 kg
Power supply 90-130 & 180-260 Vac, 105 VA, 47-63 Hz
Temperature

    Operational

    Storage


0°C to 40°C

-40 to +70°C
Humidity 5% to 85% non-condensing
CE label

Ratings & Reviews

No reviews available

Be the first to Write a Review