• Home
  • Newtec AZ119 ABS-S Satellite Modulator




Newtec AZ119 ABS-S Satellite Modulator

(0) No Reviews yet
  • ABS-S compliant
  • Data rates up to 120 Mbit/s
  • L-Band monitoring output
  • Freature-based pricing


SKU:

Input Interface
ASI/SPI Interface
  • 2x ASI input on BNC (F) - 75 ohms (coax)
  • 2x ASI ouput (loop through) on BNC (F) - 75 ohms (coax)
  • SPI on 25 pin sub-D connector
  • Optical ASI on ST (optional)
  • 188 or 204 byte mode
  • Rate adaptation
Modulation
Supported modulation standards
ABS-S

    FEC

    MODCODS

 


LDPC

QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 13/15, 9/10;

8PSK: 3/5, 2/3, 3/4, 5/6, 13/15, 9/10
Max baud rate range 1 – 45 Mbaud
Frame length Fixed physical layer frame-sizes of 30848 symbols without pilots, 31676 symbols with pilots
Roll-off factor 20 % - 25% -35%
Output Interfaces
L-band output (default)
Level -50/-7 dBm (+/- 2dB)
Frequency 950 - 1750 MHz (50 Hz steps)
Connector SMA (F), 50 ohms
Return loss > 10 dB
IF-band (optional)
Level -30/+5 dBm (± 3 dB)
Frequency 50 - 180 MHz (resolution: 47,5 Hz)
Connector BNC (F) - 75 ohms
Return loss 50 ohms : > 14 dB

75 ohms : > 20 dB
L-band monitoring output (with all configurations)
Level -45 dBm
Frequency default: identical to L-band output with option AA-02: 1080 MHz
Connector SMA (F), 50 ohms
Return loss > 7 dB
Spurious performance better than - 65 dBc @ -10 dBm output level
Generic
Monitor and control interfaces
  • Web server GUI (HTTP) via web browser
  • Diagnostics report, alarm log (HTTP)
  • RMCP over TCP-IP/UDP and RS232/RS485
  • SNMP v.2c/MIB
Alarm Interface
  • Electrical dual contact closure alarm contacts
  • Connector 9-pin sub-D (F)
  • Logical interface and general device alarm
Physical
1RU, width 19”, depth 51 cm, 6 kg
Power supply 90-130 & 180-260 Vac, 105 VA, 47-63 Hz
Temperature

    Operational

    Storage


0°C to 40°C

-40 to +70°C
Humidity 5% to 85% non-condensing
CE label

Ratings & Reviews

No reviews available

Be the first to Write a Review