• Home
  • Mitec Telecom C-Band Block Upconverters

Mitec Telecom C-Band Block Upconverters

(0) No Reviews yet
  • C-Band 5.850 - 6.425 GHz
  • 10 - 200W Power Output
  • 1:1 Redudancy in all power levels
  • CPR137 Waveguide output


Output Power
10 Watt unit10 Watts / 40 dBm
20 Watt unit20 Watts / 43 dBm
40 Watt unit40 Watts / 46 dBm
60 Watt unit60 Watts / 48 dBm
80 Watt unit80 Watts / 49 dBm
100 Watt unit100 Watts / 50 dBm
125 Watt unit125 Watts / 51 dBm
150 Watt unit150 Watts/51.8 dBm
200 Watt unit200 watts/53 dBm
Power Consumption
10 Watt Unit120 Watts
20 Watt Unit180 Watts
60 Watt Unit450 Watts
40 Watt Unit250 Watts
80 Watt Unit500 Watts
100 Watt Unit600 Watts
125 Watt Unit750 Watts
150 Watt Unit900 watts
200 watt unit1100 watts
Electrical Characteristics
Input Frequency Range - IF950-1525 MHz
Output Frequency Range - RF5.850 - 6.425 GHz
Output Return Loss18 dB minimum
System Gain70 dB nominal
Gain Flatness over full band± 1.5 dB nominal
Spurious at rated power-50 dBc maximum
Third order IMD (two equal tones 5 MHz apart)-26dBc max. @ 3dB back off (SCL 6 dB back off from P1dB)
Phase Noise at 300 Hz offset-60 dBc/Hz
Phase Noise at 1 kHz offset-70 dBc/Hz
Phase Noise at 10 kHz offset-80 dBc/Hz
Phase Noise at 100 kHz offset-90 dBc/Hz
Phase Noise at 1 MHz offset-100 dBc/Hz
Gain Variation± 1.5 dB over operating temperature range
Supply Voltage for BUC:24 VDC & 10MHz (other options available)
For Booster:110/220 VAC (47-63 HZ) Auto Ranging (48VDC optional)
Mechanical Characteristics
M&C - Analogue or RS-485 InterfaceMS3112E16-26P (other options available)
Power InterfaceMS3102R16-10P (other options available)
RF Input InterfaceType N(F) (type F optional)
RF output InterfaceCPR-137 (other options available)
Environmental Conditions
Storage Temperature-55°C to +85°C
Operating Temperature-40°C to +60°C
Humidity100%, considering, rain 2" per hour
Altitude10000' AMSL

Ratings & Reviews

No reviews available

Be the first to Write a Review