• Home
  • Ericsson EN8100 MPEG-2 Standard Definition Encoder




Ericsson EN8100 MPEG-2 Standard Definition Encoder

(0) No Reviews yet
  • Ultimate Performance Encoding
  • Efficient Rack Space
  • Hot Swap Support
  • Control via nCompass Control


SKU:

SD MPEG-2 Video and Audio Encoder Option Card
1 to 6 SD MPEG-2 encoder option modules
Full support for module level Hot-Swap
SD MPEG-2 Option Card Inputs
Video
SDI serial digital video 625 and 525 line standard supported with EDH error detection and health monitoring
HSYNC support for 625 and 525 line (option)
Audio
Two stereo pairs input via AES-EBU or embedded on SDI
Supports both balanced (AES3) and unbalanced (AES3id) digital audio inputs
Video Encoder
MPEG-2 MP@ML Encoding
0.256 to 15 Mbps
Performance upgrade enables RDO encoding for 15% efficiency gain at typical DTH bit-rates (option)
Triple Pass "Pixel Perfect" fully exhaustive motion estimation
TANDBERG Reflex statistical multiplexing support (option)
Vertical Resolutions 576, 288 (PAL), 480, 240 (NTSC)
Horizontal Resolutions 720, 704, 640, 544, 528, 480, 352
GOP processing includes adaptive GOP structure and adaptive GOP length
Fully configurable legacy modes to ensure interoperability with all generations of deployed set-top boxes
Audio Encoder
2 x stereo audio channel processing
MPEG-1 Layer II audio encoding standard
Encoding rates from 32 kbps to 384 kbps
Dolby Digital® (AC-3)
Encoding rates from 56 kbps to 640 kbps (option)
Pass through of pre-encoded Dolby® Digital (AC-3) 1 - 5.1 channel
VBI
World Standard Text (WST - ETS300472) 625 only
Closed captioning EIA-608, EIA-708 and SCTE 20
Closed captions inserted by line 21 or SMPTE 334
Wide screen signaling (WSS) 625 only
Adaptive bandwidth
Clarus™ professional grade adaptive spatial & temporal noise reduction offering four adaptive levels (option)
Scene cut detection and I frame insertion
Frame re-synchronization
Features
Internal test tone and test pattern generation
Auto switching on loss of input source to test pattern, colored image, last good video frame with selectable text message
EN8100 Output
Transport stream over Dual Gigabit Ethernet links for iSIS 8000® system deployments
EN8100 Control
Front panel
nCompass Control supported via dual Ethernet
Support for SNMP traps
Physical and Power
Dimensions (W x D x H) 485 x 578 x 44.5mm (19” x 22.8” x 1RU)
Approximate Weight
8.3 kg single encoder and single PSU
8.9 kg single encoder and dual PSU
0.33 kg each additional SD MPEG-2 option module
Power Input 100 - 120 VAC or 220 - 240 VAC wide ranging (Dual PSU option)
Consumption
80W for a single channel encoder up to 280W maximum, depending on the number of SD MPEG-2 encoders fitted.
Environmental Conditions
Operating Temperature -10°C to 50°C (14°F to 122°F)
Operating Humidity <95% non-condensing
Compliance
CE marked in accordance with EU Low Voltage and EMC Directives
EMC Compliance
EN55022, EN55024, AS/NZS3548, EN61000-3-2 and FCC CFR47 Part 15B Class A
Safety Compliance
EN60950, IE60950

Ratings & Reviews

No reviews available

Be the first to Write a Review