• Home
  • Ericsson E5780 / E5782 High Definition Encoders

Ericsson E5780 / E5782 High Definition Encoders

(0) No Reviews yet
  • Market Leading Performance
  • Wide Range of Applications
  • Variable bit-rate operation modes
  • Flexible expansion support


Composite video (PAL/NTSC) 10 bit sampling
SNR >60dB
SDI serial digital video 625 and 525 line standard

supported with EDH error detection and health monitoring
HSYNC support for 625 and 525 line
Analog input levels 12, 15, 18, 21, 22 and 24dB
2 x AES/EBU digital audio inputs
Up to four stereo pairs can be extracted from the

SDI or HD-SDI input.
Input levels 12, 15, 18, 21, 22 and 24dB
2 x analog audio’s balanced 600W/20kW
Sampling rates of 32 kHz, 44.1 kHz & 48 kHz
3 x ASI copper Single Program Transport Stream
Video Encoder
MPEG-2 422P@ML 2 to 50 Mbps (in SD mode)
MPEG-2 MP@ML 1.5 to 15 Mbps (in SD mode)
MPEG-2 MP@HL 2 to 90 Mbps (480p and 576p)
MPEG-2 MP@HL 6 to 90 Mbps (720p and 1080i)
MPEG-2 422P@HL 6 to 90 Mbps (720p and 1080i)*
*Only supported on the E5782
Audio Encoder
2 x stereo audio channel processing
MPEG-1 Layer II Audio Encoding Standard
Encoding rates from 32 kbps to 384 kbps
Dolby Digital® (AC-3)
Encoding rates from 56 kbps to 640 kbps
Dolby® Digital (AC-3) 1 – 5.1 channel, Dolby® E,

linear PCM and DTS pass-through
Supported Standard Definition VBI MPEG-2 MP@ML
World Standard Text (WST)
Closed captioning
Nielsen data AMOL I & AMOL II
Program delivery control (PDC)
Video programming signal (VPS)
Wide screen signaling (WSS)
Time code from VITC
Supported Standard Definition VBI MPEG-2 422P@ML
All types when encoded as picture information
Supported High Definition VBI MPEG-2
EIA-708 Closed caption insertion via RS-232

interface or via HDSDI (SMPTE 334)
World standard text (WST) via SD SDI or CVBS
Closed Captioning via SD SDI, CVBS, SMPTE 333 or SMPTE 334
Time Code from VITC in HD-SDI (SMPTE RP 188)
Advanced Pre-processing
Wide ranging hierarchical motion estimation search
Ericsson spatial & temporal noise reduction
Film Mode 3:2 pull down
Frame re-synchronization
Selectable range of delay modes for low latency operatio
Front panel LCD with easy set-up and operation
Sixteen fully adjustable operational configurations
Internal test tone and test pattern generation
Auto switching on loss of input source to test

pattern, colored image, last good video frame with

selectable text message
Input freeze frame and audio silence detection
Logo insertion
SCTE 35 controlled by SCTE104 or GPI contact closure
Supported HD Resolutions
1080 x 1920/1440/1280/960pSF 23.976, 24, 25
1080 x 1920/1440/1280/960i 25, 29.97, 30
720 x 1280/960p 50, 59.94, 60
576 x 720/704p 50
480 x 720/704p 59.94, 60
VANC data extraction up to 1.4 Mbps
RS-232. Supported baud rates 1200, 2400, 4800,

9600, 19200, 38400 baud
RS-422 n x 64 kbps from 64 kbps to 2048 kbps

(selectable) or n x 56 kbps from 56 kbps to 1792 kbps (selectable)
Front panel LCD with quick access keys and alpha numeric keypad
nCompass Control
RS-232 & RS-485 inputs and outputs for remote control
Support for external SNMP control
Physical and Power
2RU 19” rack-mountable chassis
Dimensions (W x H x D)
442.5 x 88.9 x 499.5mm (17.25 x 3.5 x 19” approx.)
Approximate Weight
Power Input
100 - 120 VAC / 220 - 240 VAC wide ranging auto sensing
Consumption 150W (250W fully populated)
Environmental Conditions
Operating Temperature
-10°C to 50°C (14°F to 122°F)
Operating Humidity
<95% non-condensing
CE marked in accordance with EEC Low Voltage and EMC directives EN55022, EN55024: 1998, EN61000-3-2 for EMC and the EN/IEC60950 Safety Standard as a minimum where applicable
Also meets other relevant requirements and national standards derived from international requirements on which the above European Standards are based and FCC Pt 15 Class A

Ratings & Reviews

No reviews available

Be the first to Write a Review