• Home
  • Ericsson CE-x MPEG-4 AVC HD 4:2:2 Contribution Encoder Modules

Ericsson CE-x MPEG-4 AVC HD 4:2:2 Contribution Encoder Modules

(0) No Reviews yet
  • Highest contribution video quality
  • Multiple low latency modes
  • 3G/HD/SD-SDI, video input
  • 2 slots per mod. 2 mods per chassis


CE-x*** Video and Audio Encoder Option Module
Two slots per module
One to two CE-x*** option modules per chassis
Full support for module level hot swap
3G/HD/SD-SDI serial digital video with EDH error detection and health monitoring
HSYNC support for single PCR operation (separate hardware option for HSYNC input)
Input Level 800 mV ptp ±10 percent
Return loss >15 dB, 10 MHz to 270 MHz
Up to eight stereo pairs embedded on HD-SDI
Up to four stereo pairs via AES EBU (Connector via D-Type to XLR)
Supports both balanced (AES3) and unbalanced (AES3id) digital audio inputs
48 kHz sampling rate
Video Encoder
MPEG-4 AVC Main Profile @ Level 4.0 (1 Mbps to 20 Mbps) (CE/SWO/CE-x/H264)
MPEG-4 AVC High Profile @ Level 4.0 (1 Mbps to 25 Mbps) (CE/SWO/CE-x/264) + (CE/SWO/CE-x/HD
MPEG-4 AVC 4:2:2 Profile @ Level 4.1 (1 Mbps to 80 Mbps) (CE/SWO/CE-x/264) + (CE/SWO/CE-x/HD+(CE/SWO/CE-x/422)
MPEG-2 Video Main Profile @ Main Level
MPEG-2 Video Main Profile @ High Level (CE/SWO/CE-x/HD)
1 Mbps to 80 Mbps bit-rate range (depends on profile/level supported)
CABAC entropy encoding up to 62.5 Mbps
Manual CABAC switching-point override
Triple pass “Pixel Perfect” fully exhaustive motion estimation
Multiple low latency modes supporting delays down to 350ms* end-to-end delay (when used in conjunction with a RX8200 receiver.) *Configuration dependant.
CBR and Low Delay modes
GOP processing includes adaptive GOP structure and adaptive GOP length
Video Resolutions
Only with CE/SWO/CE-x/HD license

1920 x 1080i 25

1920 x 1080i 29.97

1280 x 720p 50

1280 x 720p 59.94
CE-x base card

720, 704, 640, 544, 528, 480, 352 x 576i 25

720, 704, 640, 544, 528, 480, 352 x 480i 29.97

352 x 288i 25

352 x 240i 29.97
Audio Encoder
Up to 8x stereo audio channel processing
MPEG-1 Layer II encoding standard Encoding rates from 32 kbps to 384 kbps - up to 8 pairs
Dolby® Digital (AC-3) Encoding rates from 56 kbps to 640 kbps (option) - maximum of 3 pairs
Pass-through of pre-encoded Dolby Digital, up to eight streams
Dolby®E pass-through Up to four streams
Linear PCM pass-through Up to four independent stereo pairs
Ancillary Data
SMPTE 334-1 Closed Captions
SMPTE 2016-3 AFD and Bar Data
SMPTE 12-2 Time code extraction and carriage (ETSI TS101 154)
SMPTE 2038 Generic VANC data extraction, up to 2 Mbps
Advanced Pre-processing
Clarus™ professional grade adaptive spatial and temporal noise reduction, offering four adaptive levels (option)
Scene cut detection and I-frame insertion
Still detection
Internal test tone and test pattern generation
Auto switching on loss of input source to test pattern, last good video frame with selectable text message
Optional PID elimination on loss of input
Physical and Power
Approximate Weight 0.66 kg (1.5 lbs) per CE-x option module
Power Consumption per module Less than 110 W
Environmental Conditions
Operating Temperature -10°C to 50°C (14°F to 122°F)
Operating Humidity < 90% non-condensing

Ratings & Reviews

No reviews available

Be the first to Write a Review