ETL Systems L-Band Hybrid Splitter & Combiner Active 4-way with 10 MHz Inject & LNB & BUC DC
Hybrid L-band active 4-way V-SAT unit; containing one splitter and one combiner, with 18V LNB powering (on splitter), 24V or 48V BUC powering (on combiner).
A 10MHz reference signal can be injected from the internal source or via an external source.
It is provided with dual redundant power supplies for reliability in service.
The device is housed in a 1U high x 350mm deep x 19" wide shelf and is available in the impedances and connector types shown below
This unit is locally controlled via DIL switch on rear panel; and remotely controlled via RJ45 Ethernet port. Front panel LEDs for LNB power, amplifier condition and BUC. 75 ohm F Type connectors at the output of the combiner and the input of the splitter, and 50 ohm N-Type at the input of the combiner and output of the splitters.
See datasheet for full specs and configuration options.