• Home
  • Agilis AUC 68 Series Ku-Band to IF/L-Band Downconverter

Agilis AUC 68 Series Ku-Band to IF/L-Band Downconverter

(0) No Reviews yet
  • Full M&C through front panel or serial remote
  • User selectable spectrum inversion
  • Redundant ready
  • Flexible design


Input Parameters
Output Frequency 13.75 to 14.5GHz
Impedance 50 Ω
VSWR 1.6:1
Output Parameters
Input Frequency 950-1700 MHz (for Ku to L)

70 ± 18MHz (140 MHz optional) (for Ku to IF)
Impedance 50 Ω
VSWR 1.44:1
Output Power @ P1dB +5 dBm min
Transfer Parameters
Frequency spectrum User selectable (for Ku to IF)
Conversion Gain 45 dB min
Gain Adjustment 40 dB
Gain Flatness ±0.75 dB over 36 MHz Bandwidth

±1.5 dB over Full Bandwidth
Gain Stability ±0.25 dB over 24 hours at

constant temperature
In Band Spurious

    Carrier dependent

    Carrier Independent

-55 dBc at max gain

-70 dBm max
Out Band Spurious exclude LO -50 dBm max
Third order Intermodulatlon products 35 dBc @ two carriers 2 MHz apart, 8 dB backoff from Prated for each carrier
Phase Noise









-93dBc/Hz (for Ku to IF)



-95dBc/Hz (for Ku to L)
Rear Panel Connections
IF/L Output BNC Female (for Ku to IF)

N-Type Female (for Ku to L)
RF Band Input SMA Female
10MHz Ext REF Connector (Optional) BNC Female
Remote Connector DB 9 Female
Power IN AC/DC
Monitor and Control
Interface RS232/RS485/SNMP
Monitoring parameters LO & Temperature Alarms
Control Parameters Gain Adjustment @ 0.5 dB Step
Power Supply Requirement
AC Input Voltage 100 to 240 Vac 50/60 Hz
Power Consumption 35W
Operating temperature - 10°C to 50°C
Humidity up to 95% (Non-condensing)
Dimension (L x W x H) 480 x 330 x 44 mm
Weight 3.5kg (for Ku to L)

4.0kg (for Ku to IF)

Ratings & Reviews

No reviews available

Be the first to Write a Review