• Home
  • Agilis AUC 38 Series C-Band to L/IF Down Converter




Agilis AUC 38 Series C-Band to L/IF Down Converter

(0) No Reviews yet
  • Full M&C through front panel or serial remote
  • User selectable spectrum inversion
  • Redundant ready
  • Flexible design


SKU:

Input Parameters
Input Frequency 3.4 to 4.2GHz
Impedance 50 Ω
VSWR 1.6:1
Output Parameters
Output Frequency 950-1750 MHz (for C to L)

70 ± 18MHz (140 MHz optional) (for C to IF)
Impedance 50 Ω
VSWR 1.44:1
Output Power @ P1dB +5 dBm min
Transfer Parameters
Frequency spectrum User selectable (for C to IF)
Conversion Gain 45 dB min
Gain Adjustment 40 dB
Gain Flatness ±O.75 dB over 36 MHz Bandwidth

±2 dB over Full Bandwidth
Gain Stability ±O.25 dB over 24 hours at

constant temperature
In Band Spurious

    Carrier dependent

    Carrier Independent


-50 dBc at max gain

-60 dBm max
Out Band Spurious exclude LO -60 dBm max
Third order Intermodulatlon products 40 dBc @ two carriers 2 MHz apart, 8 dB backoff from Prated for each carrier
Phase Noise

    @1KHz

    @10KHz

    @100KHz



    @1KHz

    @10KHz

    @100KHz


-73dBc/Hz

-B3dBc/Hz

-93dBc/Hz (for C to IF)



-75dBc/Hz

-B5dBc/Hz

-95dBc/Hz (for C to L)
Rear Panel Connections
IF/L Output BNC Female (for C to IF)

N-Type Female (for C to L)
RF Band Input SMA Female
10MHz Ext REF Connector (Optional) BNC Female
Remote Connector DB 9 Female
Power IN AC/DC
Monitor and Control
Interface RS232/RS485/SNMP
Monitoring parameters LO & Temperature Alarms
Control Parameters Gain Adjustment @ 0.5 dB Step
Power Supply Requirement
AC Input Voltage 100 to 240 Vac 50/60 Hz
Power Consumption 35W
Environmental
Operating temperature - 1O°C to 50°C
Humidity up to 95% (Non-condensing)
Mechanical
Dimension (L x W x H) 480 x 330 x 44 mm
Weight 3.5kg (for C to L)

4.0kg (for C to IF)

Ratings & Reviews

No reviews available

Be the first to Write a Review