• Home
  • Terrasat IBUC 2 Ka-Band Intelligent Block Upconverter




Terrasat IBUC 2 Ka-Band Intelligent Block Upconverter

(0) No Reviews yet
  • Integrated BUC/SSPA
  • High linearity
  • Internal 10 MHz reference option
  • Trouble-free commissioning


SKU: SATRES-93843

Frequency Range
Band 1

    RF

    IF


29.5 to 30.0 GHz

1.0 to 1.5 GHz
Band 2

    RF

    IF


30 to 31 GHz

1.0 to 2.0 GHz
VSWR / Impedance 1.5:1 max / 50 Ohm
Input Connector Type N female (50 Ohm)
Input Connector options Type F (75 Ohm), TNC (50 Ohm)
Input power detector -55 to –20 dBm
Gain
Small Signal Gain (L-band to RF)

with attenuator set to 0 dB

    5W

    10W




68 dB min

71 dB min
Attenuator range 30 dB variable in 0.1 dB steps
Gain flatness Band 1

    Full band

    36 MHz


3 dB p-p max

1 dB p-p max
Gain flatness Band 2

    Full band

    36 MHz


4 dB p-p max

1.5 dB p-p max
Gain variation over temperature Band 1

    Open loop

    With AGC


3 dB p-p max

1 dB p-p max
Gain variation over temperature Band 2

    Open loop

    With AGC


4 dB p-p max

1 dB p-p max
RF Output
Interface WR28 UG cover with groove
VSWR 1.3:1 max
Rated output power Psat

    5W

    10W


+37 dBm min

+40 dBm min
Rated output power Plinear

    5W

    10W


+34 dBm

+37 dBm
Plinear is the maximum linear power as defined by MIL-STD-188-164A.
Level stability with ALC ±0.5 dB
Output power detector range Rated power to –20 dB
Power reading accuracy ±1.0 dB max.
Spurious -50 dBc
AM/PM Conversion < 2 deg/dB @ Plinear
Output Noise Power Density, Tx< -87 dBm/Hz
SSB Phase Noise (External reference)

    10 Hz

    100 Hz

    1 kHz

    10 kHz

    100 kHz

    1 MHz


-105 dBc/Hz

-135 dBc/Hz

-145 dBc/Hz

-155 dBc/Hz

-155 dBc/Hz

-155 dBc/Hz
SSB Phase Noise (IBUC)

    10 Hz

    100 Hz

    1 kHz

    10 kHz

    100 kHz

    1 MHz


-32 dBc/Hz

-62 dBc/Hz

-72 dBc/Hz

-82 dBc/Hz

-92 dBc/Hz

-102 dBc/Hz
External Reference (multiplexed on TX IFL)

    Frequency

    Level


10 MHz

-12 to +5 dBm
Internal Reference - available
Local Oscillator Frequency
Band 1 28500 MHz
Band 2 29000 MHz
Sense Non-Inverting
IBUC Power Supply
Voltage (DC/AC) 48 ±11 VDC / 100 to 240 VAC
Option for 5W 24 ±4 VDC
DC via coax available on 5W and 10W
Power Consumption

    5W

    10W


75 W / 110 VA

150 W / 180 VA
Monitor and Control
Ethernet (HTTP, Telnet, SNMP) via RJ-45 connector.
RS232/485, Hand-held Terminal via MS-type connector FSK, multiplexed on TX IFL.
Environmental
Operating temperature -40oC to +60oC
Relative humidity 100% condensing
Altitude 10,000 ft., (3,000 m) ASL
Mechanical (DC powered / AC powered)

    5W



    10W

 


10.5x6x3.8 in. / 10.5x6x4.2 in.

9 lbs / 10 lbs

10.5x6x5.2 in. / 10.5x6x5.6 in.

10.5 lbs / 11.5 lbs

Ratings & Reviews

No reviews available

Be the first to Write a Review