|
|
|
|
Xicom XTRS-400X-B1 X-Band SSPA with Block Upconverter
- 400 Watts X-Band (7.9 to 8.4 GHz)
- Complete Digital Interface
- Optional Redundancy Control
- Removable Power Supply
|
|
|
|
|
|  |
|
|
Xicom XTRS-400X-B1 X-Band SSPA with Block Upconverter
The Xicom XTRS-400X-B1 is a highly efficient rackmountable
solid state power amplifier (SSPA)
designed for fixed and mobile uplink applications.
RF filters, isolators, cooling, and monitor and
control (M&C) systems are all self-contained
within the package.
Rack space is conserved because the amplifiers
occupy only 7 rack units (12.25 inches) of a
standard 19 inch rack cabinet. Nominal weight is
140 pounds.
XTRS-400X-B1 Features
-
400 Watt
- Complete Digital M&C Interface
Ethernet
RS-232
RS-485
- Optional Redundancy Control
1:1
1:1 with load switching
1:1 Soft Fail
- Removable Power Supply
The unit features a menu driven front panel
display, RS-232/422/485 serial port and Ethernet
interfaces for complete computer control. Forward
power, reverse power and temperature, and
default parameters are easily monitored on the
four line front panel display.
Gain control is provided via the front panel or
through the remote interfaces.
A high frequency resonant conversion power
supply is used that accepts a wide range of prime
power (90 to 264 VAC). Power factor correction
circuitry is also included which minimizes line current
distortion and reduces the required Volt-
Amps input.
The amplifier includes an integrated L-Band
Block Upconverter that interfaces to standard
modems operating in the 950-1450 MHz range.
The L-Band transmit signal and 10 MHz reference
are brought to the unit over a single coaxial
line.
Depending upon user requirements, this high
power amplifier can be configured for single
thread, redundant, or phase combined configurations.
tab 2
| XTRS-400X-B1 |
| FREQUENCY RANGE standard Output |
7.9 - 8.4 GHz |
| Input |
950-1450 MHz |
| LO Frequency |
6950 MHz |
| Input Level, w/o damage |
10 dBm Max |
| Reference Signal Frequency |
external 10 MHz |
| 10 MHz power level |
2 dBm, Max |
| Reference Input Impedance |
50 Ohms |
OUTPUT POWER |
| Saturated Power (Typical) |
56 dBm |
| Rated Power(P1dB) @ Amplifier Flange |
55 dBm |
Gain |
| Small Signal, minimum |
60 dB |
Maximum SSG Variation Over:
Any narrow band
Full Band |
+0.65 dB per 80 MHz
+1.25 dB |
| Slope, maximum |
± 0.04 dB/MHz |
| Stability, 24 Hr maximum |
± 0.25 dB |
| Stability, Temperature |
± 2.0 dB maximum with two equal carriers
at 3 dB total power backoff from rate output
|
| HARMONIC OUTPUT, maximum |
- 60 dBc |
| AM/PM CONVERSION, maximum |
2.5 deg/dB at 3 dB below rated output power |
NOISE POWER, maximum
Transmit Band
Receive
|
- 80 dBW/4 kHz
- 80 dBW/4 kHz
|
Group Delay Max over any 80 MHz Bandwidth
Linear
Parabolic
Ripple |
± 0.01 nS/MHz
± 0.005 nS/MHz²
0.5 nS/Pk-Pk
|
RESIDUAL AM NOISE, maximum
in band spurious |
- 60 dBc > 100 kHz from carrier
AC fundamental -50 dBc Sum of all spurs -47 dBc
|
| OUTPUT SPURIOUS @ Rated Power (P1dB) |
-60 dBc |
PHASE NOISE, maximum
@100 Hz
@1 kHz
@100 kHz
@100 kHz
@1 MHz
|
-63 dBc/Hz
-73 dBc/Hz
-83 dBc/Hz
-93 dBc/Hz
-103 dBc/Hz
|
10 MHz Reference Phase Noise maximum
1 kHz
10 kHz
100 kHz |
-150 dBc/Hz
-160 dBc/Hz
-160 dBc/Hz |
Prime Power |
| 90-260 VAC |
|
| 47 to 63 Hz, single phase |
|
| 2800 VA Typical |
|
| 0.95 Minimum Prime Power Factor |
|
Environmental |
| NONOPERATING TEMPERATURE RANGE |
-50° C to + 70° C |
| OPERATING TEMPERATURE RANGE |
0° C to +50° C
2° C/1000 feet derating |
| HUMIDITY |
Up to 95% Condensing |
| ALTITUDE |
12,000 feet MSL maximum |
| SHOCK AND VIBRATION |
Normal Transportation |
| COOLING |
Forced Air (400 CFM Typical) |
|
|
|
|
|
|
|
|
|
