Xicom XTRS-100X 100W X-Band SSPA (Rack Mount)

100 Watts X-Band (7.9 to 8.4 GHz)
Complete Digital M&C Interface
Optional Redundancy Control
Removable Power Supply

Price : Call For Price

	Share
	Printer friendly format
	Chat with a sales engineer

Xicom XTRS-100X 100W X-Band Rack Mount SSPA

The Xicom XTRS-100X is a highly efficient rackmountable solid state power amplifier (SSPA) designed for fixed and mobile uplink applications. RF filters, isolators, cooling, and monitor and control (M&C) systems are all selfcontained within the package.

XTRS-100X Features

100 Watt
Complete Digital M&C Interface
Ethernet
RS232
RS485
Optional Redundancy Control
1:1
1:1 with load switching
1:1 Soft Fail
Removable Power Supply

Rack space is conserved because the amplifiers occupy only 4 rack units (7 inches) of a standard 19 inch rack cabinet. Nominal weight is 50 pounds.

The unit features a menu driven front panel display, RS232/ 422/485 serial port and Ethernet interfaces for complete computer control. Forward power, reverse power and temperature, and default parameters are easily monitored on the four line front panel display.

Gain control is provided via the front panel or through the remote interfaces.

A high frequency resonant conversion power supply is used that accepts a wide range of prime power (90 to 264 VAC). Power factor correction circuitry is also included which minimizes line current distortion and reduces the required Volt-Amps input.

Depending upon user requirements, this high power amplifier can be configured for single thread, redundant, or phase combined configurations.

tab 2

XTRS-100X
FREQUENCY RANGE standard Output	7.9 - 8.4 GHz
OUTPUT POWER
Saturated Power (Typical)	50 dBm
Rated Power(P1dB) @ Amplifier Flange	49 dBm
Gain
Small Signal, minimum	60 dB
Maximum SSG Variation Over: Any narrow band Full Band	+0.65 dB per 80 MHz +1.25 dB
Slope, maximum	± 0.04 dB/MHz
Stability, 24 Hr maximum	± 0.25 dB
Stability, Temperature	± 2.0 dB maximum with two equal carriers at 3 dB total power backoff from rate output
HARMONIC OUTPUT, maximum	- 60 dBc
AM/PM CONVERSION, maximum	2.5 deg/dB at 3 dB below rated output power
NOISE POWER, maximum Transmit Band Receive	- 80 dBW/4 kHz - 80 dBW/4 kHz
Group Delay Max over any 80 MHz Bandwidth Linear Parabolic Ripple	± 0.01 nS/MHz ± 0.005 nS/MHz² 0.5 nS/Pk-Pk
RESIDUAL AM NOISE, maximum in band spurious	- 60 dBc > 100 kHz from carrier AC fundamental -50 dBc Sum of all spurs -47 dBc
OUTPUT SPURIOUS @ Rated Power (P1dB)	-60 dBc
PHASE NOISE, maximum	10 dB below IESS Phase Noise Profile
Prime Power
90-264 VAC
47 to 63 Hz, single phase
700 VA Typical
0.95 Minimum Prime Power Factor
Environmental
NONOPERATING TEMPERATURE RANGE	-50° C to + 70° C
OPERATING TEMPERATURE RANGE	0° C to +50° C 2° C/1000 feet derating
HUMIDITY	Up to 95% Condensing
ALTITUDE	12,000 feet MSL maximum
SHOCK AND VIBRATION	Normal Transportation
COOLING	Forced Air (175 CFM Typical)