|
|
|
|
TANDBERG EN5240 MPEG-2 Encoder
|
|
|
|
|
|  |
|
|
EN5240 MPEG-2 Encoder
The EN5240 has 4 MPEG-2 encoders with support for 1 or 2 stereo pairs per
channel. The EN5240 supports either an ASI or IP streaming output.
Each encoder features:
-
Analog or Digital input versions
-
Analog version has VCR Mode for tolerance of consumer VHS sources
- MCTF noise reduction
- Support for SCTE 20 and SCTE 21 closed captions
- Two stereo pairs of Dolby AC-3
Sample Configuration
Hardware Options
Dual ASI Output
The dual ASI output module outputs an MPTS.
Fast Ethernet IP Output
The IP output module output can stream combinations of MPTS and SPTS.
Each encoder can feed either an SPTS or MPTS.
Business Benefits
- Cost effective solution.
- Space saving 1RU size.
-
Flexibility to accept either
analog or digital inputs.
-
Scalable. Small systems can
be controlled from a web
browser and can support remultiplexing.
Large systems
with redundancy can be
implemented with nCompass
Control.
-
The EN5240 supports SCTE
35 for digital program
insertion controlled by
contact closure or DVS 525.
tab 2
| Analog Video Inputs |
| 4 x Analog composite video (PAL/NTSC) 10bit sampling |
|
| VCR source compatible mode |
|
| SCTE 35 Digital Program Insertion controlled by GPI Contact Closure or DVS 525 |
|
Analog Audio Inputs |
| 4 x 2 stereo pairs inputs via analogue |
|
| Analog audio balanced 600O/20kO |
|
| Input level adjustable from 0 to +20dBu in 0.5dBu steps relative to +4dBu reference |
|
SDI Video Inputs |
| 4 x SDI serial digital video 625 and 525 line standard supported with EDH error detection and health monitoring |
|
| SCTE 35 Digital Program Insertion controlled by DVS 525 |
|
SDI Audio Input |
| Embedded in SDI |
|
Outputs |
| Dual MPTS ASI - or |
|
| Fast Ethernet, streaming over IP |
|
Advanced Pre-Processing |
| MCTF noise reduction |
|
| Variable video bandwidth |
|
| Scene cut detection |
|
Video Encoder |
| MPEG-2 4:2:0 MP@ML |
|
| Video Processing Look-Ahead multi-pass processing |
|
| 1.5 to 10 Mbit/s |
|
| Insertion of SCTE 35 messages (Analog input version only) |
|
| Vertical Resolutions 480, 240 (NTSC) 576, 288 (PAL) |
|
| Horizontal Resolutions 720, 704, 640, 544, 528, 480, 352 |
|
| VBI |
|
| Closed Captioning & V-Chip as per SCTE 20 and SCTE 21. |
|
Audio Encoder |
| 2 x stereo audio channel processing per video channel |
|
| MPEG Layer II audio encoding standard |
|
| Encoding rates from 32kbit/s to 384kbit/s |
|
| Dolby Digital® (AC-3) |
|
| Encoding rates from 56kbit/s to 448kbit/s |
|
Control |
| Configuration of IP address via front panel. |
|
| Full control & monitoring via web browser |
|
| Redundant architectures controlled by TANDBERG nCompass Control |
|
Physical & Power |
| Dimensions (W x D x H) |
442.5 x 545 x 44.5mm (17.5" x 20.7" x 1RU) |
| Approx Weight |
7.5kg |
| Power Input |
100 - 120 Vac or 220 - 240 Vac wide ranging, |
| Consumption |
10W per channel |
Environmental Conditions |
| Operating Temperature |
0°C to 50°C (32°F to 122°F) |
| Operating Humidity |
<95% non-condensing |
Compliance |
| CE marked in accordance with EU Low Voltage and EMC Directives |
|
| EMC Compliance |
EN55022, EN55024, AS/NZS3548, EN61000-3-2 and FCC CFR47 Part 15B Class A |
| Safety Compliance |
EN60950, IE60950 |
|
|
|
|
|
|
|
|
|