Licensed for use with VideoCipher RS Commercial Descrambler module
Compatible with all satellite scrambling formats
Optional CAD630 broadcast-quality second audio subcarrier Phase-Locked-Loop demodulator
Complete frequency agility at C-Band and Ku-Band frequencies, made possible with Phase-Locked-Loop frequency synthesis
Video polarity and internal C-Band/ANIK/Ku-Band select switch
6.8 MHz tunable audio configuration switch
On-Screen Display switch
AFC On/Off switch
Special five-segment, green LED signal meter
Built-in current-limited 20 VDC for powering LNBCs (low-noise block downconverters) and LNAs (low-noise amplifiers)
Critical output levels are factory precalibrated at detent positions
Gold Standard Support Program, with SCC's exclusive Seven-Year Guarantee/Lifetime Loaner Program
MT630 IRD Description
SCC's MT630 is a low-cost, one-rack-unit high C/Ku-Band satellite receiver with integrated VideoCipher®RS module option descrambler circuits. It is designed for use in Independent CATV (Community Antenna TV) and smaller SMATV (Small, Multiple-Antenna TV) applications.
The receiver input ranges from 950 to 1450 MHz RF. A VideoCipher module can be easilty slid into or removed from the chassis at the rear panel. The module's address label is visible through a slot on this panel.
Satellite channel (transponder channel) number selection is by a front panel thumbwheel dial. With the setting of a single switch, either C-Band/Ku-Band or ANIK transponder frequencies may be selected directly by the thumbwheel. Also available is a generic 0-99 Ku-Band format.
The VideoCipher right, left, and mono audio output levels are adjustable from the front panel with a single AUDIO L/R/MONO control. The bypass mono audio signal is provided by the internal #1 audio subcarrier demodulator. An internal adjustment provides setup and calibration when the audio output adjustment is at the center detent position.
The output level is adjusted for 0 dBm when tuned to a standard C-Band 6.8 MHz mono subcarrier (150 kHz peak deviation).
The video/composite output level for bypass and VideoCipher descrambling are both adjustable from the front panel VIDEO LEVEL potentiomenter. The detent position of this potentiomenter is a calibrated 1.0 V p-p (peak-to-peak) output, with a standard VideoCipher scrambled video signal (10.75 MHz video deviation at C-Band and 9.2 MHz at Ku-Band).