• Home
  • Newtec MDM6000 Satellite Modem




Newtec MDM6000 Satellite Modem

(0) No Reviews yet
  • DVB-S2 compliant
  • GSE encapsulation
  • L-Band monitoring output
  • Optional Clean Channel Technology


SKU: SATRES-173014

Input Interfaces
  • Auto switching 10/100/1000 Base-T Ethernet interface
  • Maximum rates: 155 Mbit/s in each direction or 2x380 Mbit/s in combination with NOP1760
  • Layer 2 bridge mode: Ethernet frames over satellite
  • Layer 3 bridge or router mode: IP packets over satellite
  • Encapsulation: GSE Encapsulation of Ethernet/IP frames in DVB-S2 & S2 Extensions
  • Decapsulation : GSE Decapsulation of Ethernet/IP frames in DVB-S2 & S2 Extensions
  • Filtering and routing capabilities (uplink)

    Up to 32 VLAN filters

    Up to 20 IP routes/air-MAC addresses

    Up to 10 DVB-S2/S2 Extensions Streams
  • Data filtering (downlink):

    Up to 64 ISI/AirMAC filters
  • Proxy ARP support
  • Quality of Service (QoS)
  • BBF over IP input and output interface possibilities to interwork with NOP1760
Modulation and demodulation
Supported modulation schemes and FEC

  • DVB-S2

    Outer/Inner FEC: BCH/ LDPC

    MODCODs:

    QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10;

    8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10;

    16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, 9/10;

    32APSK: 3/4, 4/5, 5/6, 8/9, 9/10
  • S2 Extensions:

    Outer/Inner FEC: BCH/ LDPC

    MODCODs:

    QPSK: 45/180, 60/180, 72/180, 80/180, 90/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180 8PSK: 80/180, 90/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180 16APSK: 80/180, 90/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180 32APSK: 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180 64APSK: 90/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180

    Linear MODCODs:

    8PSK-L: 80/180, 90/180, 100/180, 108/180, 114/180, 120/180

    16APSK-L: 80/180, 190/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180

    64APSK-L: 90/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 6150/180, 160/180, 162/180
  • FlexACM controller (optional)
  • Support of DVB-S2 VCM mode (demod)
  • FlexACM client embedded in MDM6000 modem (optional)
Baud rate range
Modulator 0,050 - 72MBaud
Grade 1 Demodulator 1 - 60Mbaud (depending on MODCOD)
Grade 2 Demodulator 1 - 72Mbaud
Frame length
DVB-S2 Short Frames 16200 bits
DVB-S2 Normal Frames 64800 bits
S2 Extensions Normal Frames 64800 bits
Roll-off factor
DVB-S2 20% - 25% - 35%
S2 Extensions 5% -10% -15% -20% - 25% - 35%
Clean Channel TechnologyTM (optional)
Roll-off 5% -10% -15% -20% - 25% - 35%
Optimum carrier spacing
Advanced filter technology
Modulation Interfaces
L-Band (configuration option)
Connector N(F), 50 ohms
Frequency 950 - 2150 MHz (10 Hz steps)
Level -35/+7 dBm (+/- 2dB)
Return loss > 14 dB
Switchable 10MHz Reference
Spurious performance Better than - 65 dBc/4kHz @ +5 dBm output level and > 256kBaud

Non-signal related: < - 80 dBc @ +5 dBm output
IF-band (configuration option)
Connector BNC (F) - 75 ohms (in termateable with 50 ohms)
Frequency 50 - 180 MHz (10 Hz steps)
Level -35/+10 dBm (± 2 dB)
Return loss 50 ohms : > 14 dB

75 ohms : > 20 dB
Spurious performance Better than - 65 dBc/4kHz @ +5 dBm output level and > 256kBaud

Non-signal related:< - 80 dBc @ +5 dBm output
L-Band monitoring
Connector SMA (F), 50 ohms
Frequency Same as L-Band output frequency or 1050 MH z in case of IF output option only
Level -45 dBm
Return loss > 10 dB
10 MHz reference output (optional)
Connector BNC (F), 50 ohms
Output level +3 dBm (+/- 2dB)
BUC power (optional)
Max. current 4A
Voltage 24V, 48V (switchable)
Demodulation Interfaces
Dual L-Band input (default)
Connector 2 x F-type (F), 75 Ohms
Return loss > 7 dB (75 Ohm – F(F))
Level -65/-25dBm
Frequency 950 - 2150 MHz
Adjacent signal < (Co+7) dBm/Hz with Co = signal level density
IF-Band input (optional, replaces one L-Band input)
Connector BNC (F) - 75 ohms
Return loss > 15 dB
Level 55 to -15 dBm
Frequency 50 - 180 MHz
Adjacent signal < (Co+7) dBm/Hz with Co = signal level density
LNB power and control
max. current 350 mA (on selected IFL input)
voltage 11,5 -14 V (Vertical polarization)

16 -19 V (Horizontal polarization) & additional

22 kHz +/- 4KHz (band selection according to universal LNB

for Astra satellites & DiSEqC command transmission)
Internal 10 MHz Reference Frequency
Standard Stability
Stability +/- 2000 ppb over 0 to 70° C
Ageing +/- 1000 ppb/year
High Stability (Optional)
Stability +/- 50 ppb over 0 to 70°C
Ageing +/- 300 ppb/year
Very High Stability (Optional)
Stability +/- 2 ppb over 0 to 65°C
Ageing +/- 500 ppb/10year
Generic
Monitor and control interfaces
Web server GUI (HTTP) via web browser
Diagnostics report, alarm log (HTTP)
SNMP v2c
Alarm Interface
Electrical dual contact closure alarm contacts
Connector 9-pin sub-D (F)
Logical interface and general device alarm
Physical
Height 1RU, width: 19”, depth 51 cm, 5.8 kg
Power supply: 90-130 & 180-260 Vac, 105 VA, 47-63 Hz
Temperature

    Operational

    Storage


0°C to +50°C / +32°F to +122°F

-40 to +70°C / -40 to +158°F
Humidity 5% to 85% non-condensing
CE label and UL (pending)

Ratings & Reviews

No reviews available

Be the first to Write a Review