Newtec Horizon Series HZ932 Dual Satellite Receiver and Deconcentrator
- Dual demodulator
- Fully transparent
- Compliant to SFN requirements
- Cost effective and easy to implement
HZ932 Dual Receiver and Deconcentrator
The Newtec Horizon Series HZ932 Dual Satellite Receiver and Deconcentrator merges the functionalities of two HZ930 deconcentrator units into a single unit. Large scale deployments of remote terrestrial transmission sites are the natural habitat for the HZ932 dual satellite receiver and deconcentrator. With the HZ932, Newtec equips transmission towers with satellite receivers in a budget-friendly way.
Transparent and efficient transport of content are key elements for each player in the primary distribution of terrestrial and mobile TV.
The HZ932 makes use of the innovative proprietary concentration technology by Newtec. This technology combines up to 8 MPEG Transport streams into a single stream without changing their content. The resulting stream remains compatible with MPEG/DVB transmission equipment such as modulators or ATM interfaces.
The HZ932 is installed at the receiving end of Newtec’s concentrator solution.
The HZ932 integrates two independent demodulators enabling it to receive two satellite signals simultaneously and extract up to 4 transport streams from each of them.
The high level of integration offers a cost and space efficient solution for highly demanding distribution environments and large scale deployments. The dual demodulator allows a multitransponder configuration as the high number of Transport streams may exceed the capacity of one transponder.
The HZ932 supports both DVB-S and DVB-S2 modulation standards. A descrambling feature has been added to protect each stream individually against piracy.
The HZ932 is easy to operate and monitor. All control and monitoring parameters are available locally on the front panel and remotely through a web interface. It is also possible to control or monitor the HZ932 via RMCP or SNMP.
HZ932 Key Features
1. Primary digital TV distribution
2. ASI networking and routing
|L-band input : dual input, selectable (per demodulator)|
|Frequency range||950-2150 MHz|
|Return loss||>7 dB (75 Ohm-F(F))|
|Signal level||-25 to -65 dBm|
|Adjacent signal||<(C0 + 7) dBm/Hz with C0 - = signal level density|
|ASI Deconcentrator outputs (default)|
|Connector||2x4 BNC female / 75 Ohm|
|Level||800 mVpp ± 10%|
|Transport stream rate limits :|
|4 Mbit/s (min) to 158 Mbit/s (max)|
|Supported modulation schemes and FEC|
|Baud rate range|
0,256 - 45 Mbaud
| Short Frames 16200 bits|
Normal Frames 64800 bits
|20% - 25% -35%|
|Output select (per output)||any TS, Concentrator or OFF|
|Reference clock||internal / external (optional)|
|Scrambling mode||ON/OFF per output|
|Scrambling key||6 byte (per output)|
|Monitor and Control Interfaces|
|Very compact||1RU, width 19”, depth 45 cm, 4 kg|
|Power Supply||90-130 and 180-260 Vac, 40 VA, 47-63 HZ|
0°C to 40°C
-40°C to +70°C
|Humidity||5% to 85% non-condensing|