• Home
  • Newtec HZ914 Multistream Satellite Receiver




Newtec HZ914 Multistream Satellite Receiver

(0) No Reviews yet
  • DVB-S2 Multistream/VCM compliant
  • QPSK, 8PSK, 16APSK and 32APSK
  • ISSY synchronisation
  • Optional 10 MHz ref. input/output


SKU: SATRES-34109

Input Interface
Dual L-band input (default)
  • Connector 2 x F-type (F), 75 ohms
  • Level -65/-25dBm
  • Frequency 950 - 2150 MHz
  • Return loss > 7 dB
  • Adjacent signal < (Co+7) dBm/Hz where Co = signal level density
IF-band input (optional, replaces one L-band input)
  • Connector BNC (F) - 75 ohms
  • Level -55 to -15 dBm
  • Frequency 50 - 180 MHz
  • Return loss > 15 dB
  • Adjacent signal < (Co+7) dBm/Hz where Co = signal level density
LNB power and control
  • Max. current 350 mA (on selected IFL input)
  • Voltage 11,5 -14 V (Vertical polarization) 16 -19 V (Horizontal polarization) & additional 22 kHz +/- 4KHz (band selection according to universal LNB for Astra satellites & DiSEqC command transmission)
  • 10 MHz reference
Demodulation
Supported modulation schemes and FEC
  • DVB-S2:

    Outer/Inner FEC: BCH/ LDPC

    MODCODS: QPSK: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10;

    8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10;

    16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, 9/10;

    32APSK: 3/4, 4/5, 5/6, 8/9, 9/10
  • DVB-S2 Multistream and VCM support
Max baud rates DVB-S2:

- QPSK/8PSK/16APSK 0,256 – 45 Mbaud

- 32 APSK 1-33 Mbaud
Frame length
  • DVB-S2 Short Frames 16200 bits
  • DVB-S2 Normal Frames 64800 bits
  • DVB-S/DSNG 188 bytes

    Mixing of normal frames & short frames not possible in Multistream
Roll-off factor 20 % - 25% -35%
Output Interface
QUAD ASI (Asynchronous Serial Interface)
  • Connector 4xASI
  • 188 byte mode
  • BNC (F) - 75 ohms (coax)
  • Default: 2 ASI active, Optional: 4 ASI (SW upgrade)
Ethernet interfaces Auto switching 10/100/1000 Base-T Ethernet interface
  • Transport stream over IP (RTP/EDP) or data over IP interface
  • Layer 2 bridge mode: Ethernet frames over satellite (data piping)
  • Layer 3 bridge or router modes: IP packets over satellite using Multi Protocol (MPE) or Extended Performance (XPE) Encapsulation
  • Processing of up to 40 000 IP packets per second – maximum 50 Mbit/s
10 MHz reference input / output (optional)
  • Connector BNC (F) – 50 ohms
  • Input level -3dBm up to 7dBm
  • Output level +7dBm
Generic
Monitor and control interfaces
  • Web based GUI
  • Diagnostics report, alarm log
  • RMCP over TCP-IP/UDP and RS232/RS485
  • SNMP v2c
Alarm interface
  • Electrical dual contact closure alarm contacts
  • Connector 9-pin sub-D (F)
  • Logical interface and general device alarm
Physical
Very compact 1RU, width: 19”, depth 51 cm, 6 kg
Power supply 90-130 & 180-260 Vac, 105 VA, 47-63 Hz
Temperature

    Operational

    Storage


0°C to 40°C

-40 to +70°C
Humidity 5% to 85% non-condensing
CE label

Ratings & Reviews

No reviews available

Be the first to Write a Review