The Newtec EL940 is a high performance professional satellite IP
receiver designed for the reception of IP traffic transmitted over
satellite in compliance with the DVB-S, DVB-DSNG or DVB-S2
standards. The EL940 connects directly to terrestrial IP network
infrastructures via a single auto-switching Gigabit Ethernet
interface. The receiver demodulates, restores and filters the
data received from the satellite at rates of up to 105Mbits/sec (154Mbits/sec with option ED-02).
The EL940 comes with a single, fixed hardware configuration optimized for applications that requires a low initial investment
without compromising on performance. It is ideally suited for point-to-multipoint applications, such as content distribution.
The PC architecture and the Linux operating system of the EL940 allow users to integrate data processing software, such as Newtec’s Tellitec IP software, directly on the unit (this integration may modify the performance of the device).
Cost-effective design for a low initial investment
Full compatibility with the DVB-S/S2 standard for a
Highest service availability due to stable operation and
Advanced features for a maximum data
throughput and operational flexibility
Ideally suited for star topology
Possible integration with data processing software
The IP receiver can be used in both bidirectional applications
and in unidirectional applications.
Content distribution: digital cinema, digital signage
Primary distribution of IPTV
DSNG IP Applications
L-Band Input (dual input)
2 x F-type (F), 75 ohms
950 - 2150 MHz
where Co = signal level density
LNB Power and Control
350 mA (on selected L-band input)
11.5-14 V (vertical polarization), 16-19 V (horizontal
polarization) & additional 22 kHz ± 4 kHz (band selection
according to universal LNB for ASTRA satellites) & DiSEqC
command transmission (DVB-S only)