• Home
  • Newtec AZ410 Azimuth Series Broadcast Satellite Modem




Newtec AZ410 Azimuth Series Broadcast Satellite Modem

(0) No Reviews yet
  • DVB-S2 and DVB-DSNG/S compliant
  • L-Band monitoring output
  • Adaptive Equalizer
  • High versatility and flexibility


SKU: SATRES-7177

Input/Output Interface
DualFlow: Combined ASI + Ethernet
  • 2 x ASI input on BNC (F) - 75 ohms (coax)
  • 2 x ASI output on BNC (F) - 75 ohms (coax)
  • 188 byte mode
  • Auto switching 10/100/1000 Base-T Ethernet interface:
    • transport stream on IP interface (UDP/RTP)
    • Ethernet/IP QoS:
      • 4 queue priorities
      • 8 traffic classification rules
      • Configurable queue size
    • Layer 2 bridge mode: Ethernet frames over satellite (data piping)
    • Layer 3 bridge or router mode: IP packets over satellite using Multi Protocol (MPE) or Extended Performance (XPE) Encapsulation
    • Maximum 16 routes/destinations addresses
    • Processing of up to 40 000 IP packets per second – maximum 50 Mbit/s
  • DVB-S2 Multistream support
  • VCM support (optional)
Modulation and Demodulation
Supported modulation schemes and FEC
  • DVB-S/DSNG:

    Outer/Inner FEC: Reed Solomon /Viterbi

    MODCODs: QPSK:1/2, 2/3, 3/4, 5/6, 7/8;

    8PSK: 2/3, 5/6;

    16QAM: 3/4, 7/8
  • DVB-S2:

    Outer/Inner FEC: BCH/ LDPC

    MODCODS:

    QPSK: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10;

    8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10;

    16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, 9/10;

    32APSK: 3/4, 4/5, 5/6, 8/9, 9/10
Baud rate range
DVB-S2 0,256 – 45/33 Mbaud
DVB-S/DSNG1- 45 Mbaud
Frame length
DVB-S/DSNG188 bytes
DVB-S2 Short Frames 16200 bits
DVB-S2 Normal Frames 64800 bits
(Mixing of normal frames & short frames not possible in Multi-stream)
Roll-off factor
20 % - 25% -35%
Modulator Interface
L-Band output (default)
Connector SMA (F), 50 ohms
Return loss > 10 dB
Frequency 950 - 1750 MHz (50 Hz steps)
Level -50/-7 dBm (+/- 2dB)
IF-Band (optional)
Connector BNC (F) - 75 ohms (intermateable with 50 ohms)
Return loss 50 ohms : > 14 dB

75 ohms : > 20 dB
Frequency50 - 180 MHz (50 Hz steps)
Level -30/+5 dBm (± 3 dB)
L-Band monitoring output (with all configurations
Connector SMA (F), 50 ohms
Return loss >7 dB
Frequency 1080 MHz (fixed frequency)
Level -45 dBm
BUC power and reference frequency (optional)
Max. current 1.5 A
Voltage 24V
Frequency 10 MHz
Spurious performance
Better than - 65 dBc @ -10 dBm output level
10 MHz reference input / output (optional)
Connector BNC (F) – 50 ohms
Input level -3dbm up to 7dBm
Output level+7dBm
Demodulator Interface
Dual L-Band input (default)
Connector 2 x F-type (F), 75 ohms
Return loss > 7 dB
Frequency 950 - 2150 MHz
Level -65/-25dBm
Adjacent signal <(Co+7) dBm/Hz with Co = signal level density
IF-band input (optional, replaces one L-band input)
Connector BNC (F) - 75 ohms
Return loss >15 dB
Frequency 50 - 180 MHz
Level -55 to -15 dBm
Adjacent signal <(Co+7) dBm/Hz with Co = signal level density
LNB power and control
  • Max. current 350 mA (on selected IFL input)
  • Voltage 11,5 -14 V (Vertical polarization) 16 -19 V (Horizontal polarization) & additional 22 kHz +/- 4KHz (band selection according to universal LNB for Astra satellites & DiSEqC command transmission)
  • 10 MHz reference
Generic
Monitor and control interfaces
  • Web server GUI (HTTP) via web browser
  • Diagnostics report, alarm log (HTTP)
  • RMCP over TCP-IP/UDP and RS232/RS485
  • SNMP v.2c/MIB
Alarm interface
  • Electrical dual contact closure alarm contacts
  • Connector 9-pin sub-D (F)
  • Logical interface and general device alarm
Physical
1RU, width 19”, depth 51 cm, 6 kg
Power supply 90-130 & 180-260 Vac, 105 VA, 47-63 Hz
Temperature

    Operational

    Storage


0°C to 40°C

-40 to +70°C
Humidity 5% to 85% non-condensing
CE label

Ratings & Reviews

No reviews available

Be the first to Write a Review