Satcom Resources Logo [ part of your network ]
zoom
 

Ericsson TT4010 Transport Stream Analyzer

  • Portable probe with external DC power
  • Graphical Interface via Web Browser
  • TS/Service/PID Analysis
  • Internal alarm/event logging
 

The Ericsson TT4010 Transport Stream Analyzer has been designated End of Life (EOL) by the manufacturer


Here is a small selection of possible replacement units.

Related Items
         

Ericsson TT4010 Base Unit Features

TT4010 with ASI or QAM input (TT4010/BAS,
TT4010/BAS/QAM)

The TT4010 is a unique portable tool for monitoring of MPEG-2 transport streams. Its ability to display stream contents and detect errors in real-time makes it ideal for use during system installation and testing. The Web-based user interface allows access to the probe from any computer supporting a Web browser.

The TT4010 can be easily carried around and connected at any point in a TS transmission chain in any digital TV network to help operators locate errors and ensure consistent Quality of Service.

Ericsson TT4010 Transport Stream Analyzer

Ericsson’s TT4000 transport stream monitoring family is designed to fulfill the increased need for monitoring and analysis of MPEG-2 networks and higher up-time expectations of service providers. The TT4010 portable unit can be used in any MPEG-2 headend where an ASI signal is available, or out in the field to monitor the actual QAM network.

Features include:

  • Highly portable probe with external DC power supply
  • User-friendly graphical interface via a standard Web browser
  • Supports both DVB and ATSC specifications
  • DVB ASI and optional QAM Annex A input interface options
  • Error detection according to ETR290 specification
  • Bit-rate alarms
  • TS/Service/PID analysis
  • PSI/SI (DVB) and PSIP (ATSC) table analysis
  • Ethernet (TCP/IP) remote control interface
  • Internal alarm/event logging
Inputs
DVB ASI / M2S
Connector BNC (female)
Max 50 Mbps
QAM Demodulator (Annex A)
Connector F-type (female), 75 ohm
Connector F type (female), 75 ohm
Channel bandwidth 8 MHz
Tuner frequency range 50 - 860 MHz
Input signal level/channel 30 - 100dBuV
Outputs
DVB ASI / M2S (active loop-through from input)
Features
Error detection according to DVB ETR290
specification for real-time monitoring of MPEG-2/DVB TS
Internal alarm/event logger
TS analysis
Shows all present PIDs
Monitoring of total and effective bit-rate
Detection of DVB ASI packet length
Service Analysis
Shows Service IDs, names and components
(based on PSI/SI or PSIP analysis)
Graphical view of service bit-rates including
detection of min/max values dynamic updating
Service oriented alarm reporting
PID Analysis
Graphical view of individual PID bit-rates
including detection of min/max values dynamic updating
Scrambling detection
Decodes PSI/SI/PSIP tables (shows fully
decoded table syntax and hex tables)
PCR Analysis
PCR jitter measurements, including real-time
graphical view of PCR jitter distribution
DVB Type 2 and 3 PCR
Configurable alarm relay
Remote monitoring
QAM constellation diagram
Control
10BaseT Ethernet interface
TCP/IP protocol support
Remote control from Internet Explorer/
Netscape Web Browser (must support JAVA)
Physical and Power
Dimensions (W x D x H)
170 x 290 x 43mm (6.7 x 11.4 x 1.7 inches)
Input Voltage
External power, 12V/2A DC (PSU included)
Environmental Conditions
Operating Temperature
0°C to +45°C (32°F to 113°F)
Storage Temperature
-20°C to +70°C (-4°F to 158°F)
Relative Humidity 5-95% (non condensing)
QAM Spec
Signal Format
QAM4, QAM16, QAM32, QAM64, QAM128 and QAM256 mode
Compliance
CE marked in accordance with Low Voltage
Directive (LVD) 73/23/EEC and EMC directive 89/336/EEC
Name X