|
|
RX8200 Base Unit Features
RX8200 – Advanced Modular Receiver
(RX8200/BAS, FAZ 101 0113/1)
The following features are available as standard:
- 1x ASI input transport stream input
- Front panel control
- Web browser and SNMP remote control
- Alarm relay and SCTE 35 controlled contact closures for
ad-insertion signaling
- Many sophisticated, additional hardware and software based
modules available as options
RX8200 – Advanced Modular Receiver
(RX8200/BAS/BSkyB, FAZ 101 0113/71)
Functionality as RX8200/BAS with the addition of:
- NDS BSkyB single service descrambling
RX8200 – Advanced Modular Receiver
(RX8200/BAS/2, FAZ 101 0113/2)
Functionality as RX8200/BAS with the addition of:
- Base unit includes MPEG-2 and MPEG-4 4:2:2 decoder card
(functionality enabled via additional license keys)
Ericsson RX8200 Advanced Modular Receiver
Broadcasters' requirements for differing equipment configurations and the many and varied ways in which
receivers are used is driving the need for a flexible receiver platform. The Ericsson RX8200 Advanced
Modular Receiver has been designed to precisely meet these requirements.
By allowing each individual RX8200 to be configured and tailored to the user’s precise needs the perfect
balance of functionality and cost can be achieved, resulting in a unit having only the required features
without the additional expense of superfluous connectivity or functionality.
The RX8200 offers a vast and sophisticated array of configuration possibilities allowing it to cover a broad
range of applications. The RX8200 can be tailored to standard definition or high definition uses with
MPEG-2 or MPEG-4 decode technology in both 4:2:0 and 4:2:2 modes while connectivity into the receiver
is achieved with DVB-S2 satellite, IP, ATM and ASI options.
The high powered processing capabilities of the RX8200 enable the unit to be simply and easily upgraded
in the field with additional software options to increment the functionality at any point after initial
installation.
RX8200 Overview
A New Receiver With an Unrivalled Pedigree
The RX8200 Advanced Modular Receiver is Ericsson's fourth-phase receiver that builds on the success and
knowledge of previous generations of products to ensure an
unrivalled level of quality and reliability.
Increased Distribution Capacity and Efficiency
The RX8200 Advanced Modular Receiver, in combination with
Ericsson’s MPEG-4 AVC Encoders and DVB-S2
PREKOR™ satellite modulators achieves a level of bandwidth
efficiency that is unrivalled allowing more HD services per
transponder compared with any competing solution.
Wide Choice of Inputs and Outputs for Enhanced
Connectivity
The RX8200 can be integrated into a variety of system
architectures, including ASI, IP and satellite delivery systems
through a choice of input and output modules. The receiver offers
a multitude of IP, audio and video outputs for high quality
delivery to all major onward networks.
Simplified Control and Lower Cost of Operations
Organizations with large populations of RX8200 Advanced
Modular Receivers or other Ericcsonreceivers can simplify
control by integrating with the Ericcson Director control
system. Director provides remote, over-air, single-view control
from a central location, reducing the need for on-site local
operators.
Sample Configuration
Configuration Philosophy
The RX8200 Advanced Modular Receiver offers ultimate
configurability at the point of order allowing the unit to be
tailored to your precise needs incorporating just the
functionality you require thus allowing an individual and
optimal balance of price against functionality.
To configure your individual receiver follow this simple
configuration philosophy to allow easy selection of all the
features that you require.
|
 |
Input options
The RX8200 Advanced Modular Receiver has a single ASI input as
standard and can be configured with one additional choice of inputs type.
IP Transport Stream Input Options
The RX8200 may be configured with IP transport stream input connectivity
via the following options.
100/1000BaseT Input (RX8200/HWO/IP/GIGE, FAZ 101 0113/12)
- MPEG transport stream over IP
- 2x 100/1000BaseT input
- Very low latency
SMPTE 2022M Pro-MPEG FEC License
(RX8200/SWO/IP/PROMPEG, FAZ 101 0113/37)
- Enables SMPTE 2022M Pro-MPEG FEC capability for the IP input card
- Requires IP input card
Satellite Input Options
The RX8200 satellite input modules come with DVB-S QPSK support as
standard. The unit can optionally be licensed to support the new highly
efficient DVB-S2 satellite transmission standard.
Second Generation DVB-S2 Capable Satellite Demodulator
(RX8200/HWO/DVBS2/2, FAZ 101 0113/6)
- 4x L-band inputs
- DVB-S QPSK demodulation
- DVB-S2 QPSK, 8PSK, 16APSK demodulation with license keys
- DVB-S2 multi-transport stream capability with license key
Combined DVB-S2 Capable Satellite and IP Input
(RX8200/HWO/DVBS2/IP, FAZ 101 0113/70)
- 2x L-band inputs
- 2x 100/1000BaseT inputs
- Capability as per individual IP input and 2nd gen. Satellite input cards
DVB-S2 QPSK License
(RX82XX/SWO/DVBS2/QPSK, FAZ 101 0113/32)
- Adds DVB-S2 QPSK capability to DVB-S2 input option card
DVB-S2 8PSK License
(RX82XX/SWO/DVBS2/8PSK, FAZ 101 0113/30)
- Adds DVB-S2 QPSK, 8PSK capability to DVB-S2 input option card
|
DVB-S2 16APSK License
(RX82XX/SWO/DVBS2/16APSK, FAZ 101 0113/29)
- Adds DVB-S2 QPSK, 8PSK and 16APSK capability to DVB-S2 input
option card
- Second generation DVB-S2 card (RX8200/HWO/DVBS2/2, FAZ 101
0113/6) only
DVB-S2 Multi-TS Mode (RX82XX/SWO/DVBS2/VCM, FAZ 101 0113/56)
- Provides DVB-S2 Multi-transport stream input capability
- Single transport stream output from receiver
- Second generation DVB-S2 card (RX8200/HWO/DVBS2/2, FAZ 101
0113/6) only
DVB-S2 Low Symbol Rate License
(RX82XX/SWO/DVBS2/LSYM, FAZ 101 0113/31)
- Enables DVB-S2 symbol rate of 1 Msym/s to 5 Msym/s
G.703 ATM Input Option
The RX8200 may be configured with G.703 ATM connectivity.
G703 ATM Input (RX8200/HWO/G703, FAZ 101 0113/8)
- E3 or DS-3 inputs
- 34 Mbps or 45 Mbps rates
DVB-T/T2 Input Option
The RX8200 may be configured with an input to allow reception of DVB-T
and DVB-T2 digital terrestrial signals.
DVB-T/T2 Input (RX8200/HWO/DVBT2, FAZ 101 0113/16)
- 1x UHF/VHF input
- 7MHz and 8MHz input bandwidth
- DVB-T demodulation. DVB-T2 demodulation with license keys
- Future hardware option, check availability
DVB-T2 License (RX82XX/SWO/DVBT2, FAZ 101 0113/69)
- Adds DVB-T2 demodulation capability
- No multiple PLPs / channel bonding
Input Redundancy
The RX8200 Advanced Modular Receiver offers as standard automatic
redundancy switching between ASI input and the additional input option.
This redundancy switching capability may be further enhanced with the
following option.
Null Packet Detection Redundancy Switching
(RX82XX/SWO/NULL, FAZ 101 0113/48)
- Redundancy switching from primary to secondary input triggered by
presence of null packets in the incoming stream
- User definable percent of null packets to trigger redundancy switch
|
VIDEO AND TRANSPORT STREAM OUTPUT OPTIONS
The RX8200 Advanced Modular Receiver offers the option of an SD only
or HD and SD capable video output card. Both video output card options
also provide ASI transport stream output connectivity. IP transport stream
output capability may additionally be specified.
SD Video and ASI Output (RX8200/HWO/SD, FAZ 101 0113/18)
- 2x composite video outputs
- 2x switchable ASI/SDI outputs
3 Gbps HD and SD Video and ASI Output
(RX8200/HWO/HD/3G, FAZ 101 0113/10)
- 1x composite video output
- 1x RGB/YPrPb analog video output
- 3x switchable ASI/SDI/HD-SDI outputs
- 3 Gbps HD-SDI output compatible with MPEG-4 4:2:2 1080p50/60
capability
IP Transport Stream Output (RX8200/HWO/IP/OUT, FAZ 101 0113/14)
- Encapsulation of transport stream output into IP multicast
- MPTS or single or multiple SPTS output stream with licence key
- 2x Gigabit Ethernet RJ-45 interfaces capability
SMPTE 2022M Pro-MPEG FEC License
(RX8200/SWO/IP/OUT/PROMPEG, FAZ 101 0113/36)
- Enables SMPTE 2022M Pro-MPEG FEC capability for the IP output
card
- Requires IP output card
CONDITIONAL ACCESS OPTIONS
The RX8200 Advanced Modular Receiver supports many types of widely
used conditional access systems to allow for secure transmission of
content. By default the RX8200 is fitted with the capability to accept a
Conditional Access Module. Alternatively the RX8200 may be ordered with
the capability to directly accept NDS BSkyB CA smart cards.
Director by Ericsson (RX8200/SWO/DIR, FAZ 101 0113/27)
- Director CA
- Director over-air control
- Director over-air software downloads
- Director overt fingerprinting
Director by Ericsson Multi-service Decryption
(RX8200/SWO/DIR5/MSD, FAZ 101 0113/28)
- Multi-service decryption for Director by Ericsson
DVB Common Interface (RX8200/SWO/CI, FAZ 101 0113/25)
- Enables support for Conditional Access modules
DVB Common Interface Multi-service Decryption
(RX8200/SWO/MSD, FAZ 101 0113/46)
- Multi-service decryption DVB Common Interface
BISS CA (RX8200/SWO/BISS, FAZ 101 0113/23)
- BISS Mode 1 and BISS Mode E descrambling
|
BISS Multi-service CA (RX8200/SWO/BISS/MSD, FAZ 101 0113/24)
- Multi-service decryption for BISS
NDS BSkyB CA (RX8200/BAS/BSKYB, FAZ 101 0113/71)
- Single service decryption for BSkyB services
- Mutually exclusive with other CA types
Ericsson RAS CA (RX8200/SWO/RAS, FAZ 101 0113/52)
SECURITY OPTIONS
Password Protection of Web Browser
(RX8200/SWO/PW, FAZ 101 0113/51)
- Protects Web browser from malicious or accidental changes
STREAM PROCESSING OPTIONS
The RX8200 Advanced Modular Receiver offers as sophisticated choice of
transport stream processing capability allowing the unit to operate as a
cost effective network interface into a headend or transport stream
turn-around system
Single Service Filtering
(RX8200/SWO/SING/SERVFILT, FAZ 101 0113/53)
- Filter multiple services to output a single service
- Re-map PIDs for the outgoing service
Multi-Service Filtering
(RX8200/SWO/MULT/SERVFILT, FAZ 101 0113/47)
- Filter N multiple incoming services to M outgoing services
- Re-map PIDs for a single service
- CBR MPTS transport stream output
- Service splitting for multiple IP SPTS output
VIDEO DECODING OPTIONS
The RX8200 Advanced Modular Receiver provides capability to decode
every video compression standard in use today including support for the
highest quality MPEG-4 AVC 4:2:2 and JPEG 2000 *standards.
In order to offer ultimate cost effectiveness and flexibility JPEG 2000*,
4:2:2 and 4:2:0 video standards are ordered separately.
4:2:0 Decode Options
MPEG-2 SD 4:2:0 Decoding
(RX8200/SWO/MPEG2/SD, FAZ 101 0113/45)
- Enables MPEG-2 SD 4:2:0 decoding
MPEG-2 HD 4:2:0 Decoding
(RX8200/SWO/MPEG2/HD, FAZ 101 0113/44)
- Enables MPEG-2 SD and HD 4:2:0 decoding
MPEG-4 AVC SD 4:2:0 Decoding
(RX8200/SWO/MP2/MP4/SD, FAZ 101 0113/40)
- Enables MPEG-2 and MPEG-4 AVC SD 4:2:0 video decoding
- High bit rate SD MPEG-4 4:2:0 video decoding in conjunction with
RX8200/BAS/2 unit
MPEG-4 AVC HD 4:2:0 Decoding
(RX8200/SWO/MP2/MP4/SD/HD, FAZ 101 0113/41)
- Enables MPEG-2 SD and HD, MPEG-4 AVC SD and HD 4:2:0
decoding
- High bit rate HD MPEG-4 4:2:0 video decoding in conjunction with
RX8200/BAS/2 unit
|
|
4:2:2 Decode Options
MPEG-2 4:2:2 Decoding Hardware
(RX8200/HWO/MP2/422, FAZ 101 0113/15)
- Dormant hardware for MPEG-2 4:2:2 decoding
- Enable MPEG-2 4:2:2 decoding with additional options
MPEG-2 SD 4:2:2 Decoding
(RX8200/SWO/MP2/422/SD, FAZ 101 0113/59)
- Enables MPEG-2 SD 4:2:2 decoding
- Requires MPEG-2 4:2:2 only hardware or MPEG-2 & 4 4:2:2 hardware
(RX8200/BAS/2, FAZ 101 0113/2)
MPEG-2 HD 4:2:2 Decoding
(RX8200/SWO/MP2/HD/422, FAZ 101 0113/39)
- Enables MPEG-2 HD 4:2:2 decoding
- Requires MPEG-2 SD 4:2:2 decoding option
MPEG-2 and MPEG-4 AVC SD 4:2:2 Decoding
(RX8200/SWO/MP4/422/SD, FAZ 101 0113/43)
- Enables MPEG-4 AVC SD 4:2:2 decoding
- Enables MPEG-2 SD 4:2:2 decoding
- Requires RX8200/BAS/2, FAZ 101 0113/2 unit
MPEG-2 and MPEG-4 AVC HD 4:2:2 Decoding
(RX8200/SWO/MP4/422/HD, FAZ 101 0113/42)
- Enables MPEG-4 AVC HD 4:2:2 decoding
- Enables MPEG-2 HD 4:2:2 decoding
- Requires MPEG-2 and MPEG-4 AVC SD 4:2:2 option
MPEG-4 AVC HD 4:2:2 1080p 50/60 Decoding
(RX8200/SWO/HDSDI/3G, FAZ 101 0113/34)
- Enables MPEG-4 AVC HD 4:2:2 1080p50/60 decoding
- Enables 3Gig HD-SDI output
- Requires MPEG-2 and MPEG-4 AVC HD 4:2:2 decoding option
- Requires 3Gig HD-SDI output card option
VIDEO PROCESSING OPTIONS
The RX8200 offers a wide range of video processing options to allow the
decoded video to easily interface to HD and SD infrastructures.
High Quality Down-conversion
(RX8200/HWO/HQDCONV, FAZ 101 0113/60)
- Grade 1 quality Down-conversion of HD to SD
- Provides broadcast quality down-conversion allowing one HD
transmission to address both HD and SD distribution needs
- Simultaneous presentation of HD and SD on video output interfaces
Down-conversion (RX8200/SWO/DCONV, FAZ 101 0113/26)
- Grade 2 quality Down-conversion of HD to SD
- Simultaneous presentation of HD and SD on video output interfaces
Up-conversion (RX8200/SWO/UPCONV, FAZ 101 0113/54)
- Up-conversion of SD to HD resolution (4:2:0 modes only)
- Non-simultaneous up-conversion to 720p or 1080i resolution
Cross-conversion (RX8200/SWO/XCONV, FAZ 101 0113/55)
- Conversion of HD video from 720p to 1080i or from 1080i to 720p
Low Latency Decode (RX8200/SWO/LDELAY, FAZ 101 0113/38)
- Low latency video decode (4:2:0 and 4:2:2 modes)
- Compatible with MPEG-1 Layer-II, Dolby® Digital or AAC audio options
|
Frame Sync Input (RX8200/SWO/FSYNC, FAZ 101 0113/33)
- Synchronizes the IRD to the house black and burst reference
- Frame Sync functionality often partners 4:2:2 decoding
applications
Simulsync 3D Decode (RX8200/SWO/3D, FAZ 101 0113/61)
- Provides full frame , synchronized left & Right eye 3D capability
- Additionally requires Frame Sync, Down--conversion options
Requires separate RX8200 units for left & Right eye video decode
DATA AND CONTROL OPTIONS
The RX8200 Advanced Modular Receiver can be further enhanced by a
range of data pass-through and remote control capabilities.
RS232 Remote Control and Data
(RX8200/HWO/RS232, FAZ 101 0113/17)
- RS232 remote control* - Alteia protocol
- RS232 data output
High speed IP data output (RX8200/SWO/IP/DATA, FAZ 101 0113/35)
- MPE based data de-encapsulation of IP data
- Requires IP TS output option (RX8200/HWO/IP/OUT, FAZ 101 0113/14)
AUDIO OPTIONS
The RX8200 Advanced Modular Receiver provides many different audio
capabilities to allow optimal connectivity for many wide-ranging and varied
applications. Capability for MPEG-1 Layer II audio is provided with any
video decode license. Decoded audio will be embedded in (HD)SDI
outputs and output via physical audio interfaces if ordered.
Balanced Audio Output (RX8200/HWO/BAL/AUD, FAZ 101 0113/3)
- 2x stereo pairs of balanced analog and digital outputs
- Order QTY two for 4x stereo pair capability
Unbalanced Audio Output
(RX8200/HWO/UNBAL/AUD, FAZ 101 0113/19)
- 2x stereo pairs of unbalanced digital outputs
- Order QTY two for 4x stereo pair capability
Dolby® Digital Decode (RX8200/SWO/AC3, FAZ 101 0113/22)
- Enables decoding or pass-through of Dolby Digital Audio
- 2x 5.1 decode and down-mix to 2.0 (stereo)
- 1x full 5.1 decode - with 4 Audio license
- 2x 2.0/5.1 pass-through -compressed and embedded in (HD)SDI
AAC Audio decode (RX8200/SWO/AAC, FAZ 101 0113/21)
- 2x AAC-LC and HE-AAC decoding
Phase Aligned Audio (RX8200/SWO/PAA, FAZ 101 0113/49)
- Phase aligned MPEG-1 Layer II audio - 4x stereo pairs
- Requires 4x Audio license (RX8200/SWO/4AUD, FAZ 101 0113/20)
4x Audio Capability (RX8200/SWO/4AUD, FAZ 101 0113/20)
- Enables up to six decodes
- Enables pass-through of audio services three and four
- Compatible with MPEG-1 Layer II, Dolby Digital, AAC, Dolby®E and
linear audio
- Embeds up to six channels of audio into the (HD) SDI video output
- Requires QTY two audio output cards if four stereo pairs of physical
audio interfaces are desired
XLR Terminal Audio Break-Out Cable
(RX8XXX/CABLE/XLR , FAZ 101 0108/24)
- Provides XLR terminal connections for analogue and digital audio output
- 1x stereo pair per breakout cable via 2x XLR connectors
Screw Terminal Audio Break-Out Cable
(RX8XXX/CABLE/SCRTRM, FAZ 101 0108/23)
- Provides screw terminal connections for analog and digital audio output
- 1x stereo pair per breakout cable via 2x Screw terminal connectors
|
|
|
|
|
|
|