• Home
  • Ericsson E5784/E5788 Voyager High Definition DSNG Encoder




Ericsson E5784/E5788 Voyager High Definition DSNG Encoder

(0) No Reviews yet
  • Flexible options
  • 4:2:2 Encoding
  • Unrivalled manufacturer's support
  • DVB-S2 Capability


SKU: SATRES-4033

Inputs
Video
Analog CVBS NTSC and PAL 10 bit sampling
SDI (SMPTE 259M) with EDH error detection and help monitoring
HSYNC support for 625 and 525 line
HDSDI (SMPTE 292M)
Audio
Analog input levels 12, 15, 18, 21, 22 and 24dB
2 x AES/EBU stereo digital audio inputs expandable to four stereo
Up to four stereo audio channels can be extracted from SDI/HD SDI
Input levels 12, 15, 18, 21, 22 and 24dB
2 x analog audios balanced 600W/20kW
Sampling rates of 32 kHz, 44.1 kHz & 48 kHz
Outputs
Note: Base unit will have either 70 MHz IF output or L-band output. Must be specified at time of order.
Signal conditioning EN 300 421 (DVB-S) and EN 301 210 (DVB-DSNG) EN302-307 (DVB-S2)
Modulation QPSK, optional 8PSK, 16QAM, DVB-S2 QPSK, 8PSK, 16APSK, 32APSK
Symbol Rate 1 to 48 Msym/s variable in 1 Syms increments
IF Output Option
IF frequency 50 to 180 MHz (1 kHz steps)
Output power -20 to +5dBm (0.1 dB steps)
Monitor output -20dB relative to main IF output
L-band Output Option
Frequency 950 to 1750 MHz (1 kHz steps)
Output power -20 to +5dBm (0.1 dB steps)
Monitor output -30dB relative to main output
Switchable up-converter power +24Vdc, 500mA max.
Switchable 10 MHz reference
ASI Outputs
Transport Stream 3 x ASI Copper Single Program Transport Stream
Video Encoder
MPEG-2 422P@ML 1.5 to 50 Mbps (in SD mode)
MPEG-2 MP@ML 0.256 to 15 Mbps
MPEG-2 MP@HL 2 to 90 Mbps (480p and 576p)
MPEG-2 MP@HL 6 to 90 Mbps (720p and 1080i)
MPEG-2 422MP@HL 6 to 90 Mbps (720p and 1080i) on E5788 only
Supported HD Resolutions
1080 x 1920/1440/1280pSF 23.976
1080 x 1920/1440/1280pSF 24
1080 x 1920/1440/1280i 25
1080 x 1920/1440/1280i 29.97
1080 x 1920/1440/1280i 30
720 x 1280p 50
720 x 1280p 59.94
720 x 1280p 60
576 x 720/704p 50
480 x 720/704p 59.94
480 x 720/704p 60
Audio Encoder
2 x stereo audio channel processing
MPEG Layer II Audio Encoding Standard Layer 2
Standard encoding rate from 32 kbps to 384 kbps
Dolby® Digital (AC-3) Two Channel Encoding
Dolby® encoding rates from 64 kbps to 640 kbps
Dolby® Digital (AC-3) 1-5.1, Dolby® Digital E and DTS pass-through
Pre-encoded channel pass-through
Selectable Uncompressed Linear Audio
Pulse code modulated with 20-bit sampling
Advanced Pre-processing
Wide ranging hierarchical motion estimation search
Ericsson spatial & temporal noise reduction
Film mode 3:2 pull-down
Frame re-synchronization
Features
Selectable range of delay modes for low latency

operation less than 550ms in HD mode and less than 100ms in SD mode
Sixteen fully adjustable operational configurations
Internal test tone and test pattern generation
Auto switching on loss of input source to predefined screen
Logo insertion
Data
RS-232. Supported baud rates 1200, 2400, 4800, 9600, 19200, 38400 baud
RS-422 n x 64 kbps from 64 kbps to 2048 kbps

(selectable) or n x 56 kbps from 56 kbps to 1792 kbps (selectable)
Control
Front panel LCD with quick access keys and alpha numeric keypad
Web interface
RS-232 & RS-485 inputs and outputs for remote control
Support for external SNMP control
Physical and Power
2RU 19” rack-mountable chassis
Dimensions (W x D x H)
442.5 x 545 x 89mm (17.5” x 20.7” x 2RU approx.)
Approximate Weight 12kg
Power Input 100 - 120 VAC / 220 - 240 VAC wide ranging auto sensing
Consumption 150W (up to 250W fully populated)
Environmental Conditions
Operating Temperature
-10°C to 50°C (14°F to 122°F)
Operating Humidity
<95% non-condensing
Compliance
CE marked in accordance with EEC Low Voltage

and EMC Directives EN55022, EN55024
1998, EN61000-3-2 for EMC and the EN/IEC60950 Safety Standard as a minimum where applicable.
Also meets other relevant requirements and national standards derived from international requirements, on which the above European Standards are based and FCC Pt15 Class A.

Ratings & Reviews

No reviews available

Be the first to Write a Review