| Inputs |
| Video |
|
| Analog composite video (PAL/NTSC) 10 bit
sampling |
|
SDI serial digital video 625 and 525 line standard
supported with EDH error detection and health
monitoring |
|
| HSYNC support for 625 and 525 line |
|
Audio |
| 2 stereo pairs input via analog, AES-EBU or SDI |
|
| Analog audio balanced 600Ω/20kΩ |
|
| Input levels |
12, 15, 18, 21, 22 and 24dB |
| Up to 4 stereo pairs can be de-embedded from SDI |
|
Outputs |
| Note: Base unit will have either 70 MHz IF output or
L-band output. Must be specified at time of order. |
| 3 x ASI Copper Single Program Transport Stream |
|
| E5714-IF |
|
QPSK Modulated (EN 300 421) 70 MHz +/- 20 MHz
IF output tunable in 125 kHz steps |
|
Maximum symbol rate 30 Msyms between 60 to 80
MHz (20 Msyms at 50 and 90 MHz) |
|
| E5714-L-Band |
|
| EN 300 421 (DVB-S) and EN 301 210 (DVB-DSNG) |
|
| EN 302-307 (DVB-S2) |
|
| Frequency |
950 to 1750 MHz (1 kHz steps) |
| Output power |
-20 to +5 dBm (0.1 dB steps) |
| Monitor output |
-30 dB relative to main output |
| Switchable 10 MHz reference |
|
| No 24V up-converter power is provided by 1RU
models |
|
| Modulation |
QPSK, optional 8PSK, 16-QAM,
DVB-S2 QPSK, 8PSK, 16APSK, 32APSK |
| Symbol rate |
1 to 48 Msyms variable in 1 Syms
increments |
Video Encoder |
| Vertical Resolutions 576, 288 (PAL), 480, 24
(NTSC) |
|
| Horizontal Resolutions |
720, 704, 640, 544, 528,
480, 352 |
| MPEG-2 MP@ML |
1.5 to 15 Mbps (without performance upgrade) |
| 0.256 to 15 Mbps (with performance upgrade) |
|
Performance Upgrade option enables long GOP and
adaptive GOP features |
|
| MPEG-2 422P@ML (option) |
|
| 1.5 to 50 Mbps |
|
| “Pixel Perfect” fully exhaustive motion estimation |
|
Audio Encoder |
| 2 x stereo audio channel processing |
|
| MPEG Layer II Audio Encoding Standard |
|
| Encoding rates from 32 kbps to 384 kbps |
|
| Dolby Digital® (AC-3) |
|
| Encoding rates from 56 kbps to 640 kbps |
|
Pass-through Dolby Digital® (AC-3) 1 – 5.1
channel, Dolby® E, linear PCM and DTS |
|
Data |
RS-232. supported baud rates 1200, 2400, 4800,
9600, 19200, 38400 baud |
|
RS-422 n x 64 kbps from 64 kbps to 2048 kbps
(selectable) or n x 56 kbps from 56 kbps to 1792
kbps (selectable) |
|
VBI |
| World Standard Text (WST – ETS300472) 625 only |
|
| Closed captioning EIA-608, EIA-708 and SCTE 20 |
|
| Nielsen data AMOL I & AMOL II, 525 only |
|
| NABTS - 525 line only (option) |
|
| Video Index and Active Format Descriptor (AFD) |
|
| Video programming signal (VPS) 625 only |
|
| Wide screen signaling (WSS) 625 only Time Code
from VITC |
|
Other Features |
| Selectable range of delay modes for low latency
operation |
|
| Front panel LCD with easy set up and operation |
|
| Sixteen fully adjustable operational configurations |
|
| Internal test tone and test pattern generation |
|
Auto switching on loss of input source to test
pattern, colored image, last good video frame with
selectable text message |
|
| Input freeze frame and audio silence detection |
|
| Logo insertion |
|
| Software upgrade to DVB-S2 (L-Band version only) |
|
Optional Upgrades |
| Video Encoding |
|
| MPEG-2 422P@ML bit-rate range 1.5 to 50 Mbps |
|
| Performance Upgrade |
|
| Saves circa 0.8 Mbps channel |
|
| Advanced Noise Reduction |
|
| RAS and/or BISS Scrambling |
|
Allows material to be protected from illegal viewing
(as per EBU Tech 3292 May 2002) |
|
| Higher Order Modulation and DVB-S2 |
|
L-Band version can be upgraded to support DVB-S,
8PSK, 16QAM and DVB-S2, QPSK, 8PSK,
16APSK, 32APSK |
|
Option Cards |
| Additional Audio* |
|
| Audio card allowing a maximum of 4 stereo pairs
total per unit |
|
| Internal Remultiplexer* |
|
| Provides up to 13-channel MCPC Operation, max.
50 Mbps |
|
| Dual Gig-E IP* |
|
| * Note: only one may be
fitted at any one time to the E5714-IF only. |
|
Control |
| Front panel |
|
| RS-232 & RS-485 interfaces for remote control |
|
| Support for external SNMP control |
|
| Support for SNMP traps |
|
| Full control & monitoring via web browser |
|
Physical and Power |
| Dimensions (W x D x H) |
|
| 442.5 x 545 x 44.5mm (17.5” x 20.7” x 1RU) |
|
| Approximate Weight |
|
| 7.5Kg |
|
| Power Input |
|
| 100 – 120 VAC or 220 – 240 VAC wide ranging |
|
| Consumption |
|
| 95W no options. 150W maximum, depending on the
option cards selected |
|
Environmental Conditions |
| Operating Temperature |
|
| -10°C to 50°C (14°F to 122°F) |
|
| Operating Humidity |
|
| <95% non-condensing |
|
Compliance |
| CE marked in accordance with EU Low Voltage and
EMC Directives |
|
EMC Compliance
EN55022, EN55024, AS/NZS3548, EN61000-3-2 |
|