|
|
MBT-5000 Features
- Meets or exceeds IESS-308/309
- Facilitates 188-164A system compliance
- Low phase noise
- Powerful M&C support
- Ethernet/Telnet/SNMP
- EIA-232/485
- Flexible configuration
- RF Band switching in minimal time without requiring tools
- Available 1:1 redundancy in a 1RU chassis (MBT-5000) or a 3RU chassis (MBT-5003)
MBT-5000 L-Band Up/Down Converter System
The RF marketplace has been transitioning from traditional 70/140 MHz IF-based networks to systems using L-Band (950 to 2000 MHz)
for the modem/RF equipment link. The MBT-5000 Up/Down Converter System provides this frequency conversion between
L-Band IF and C-/X-/Ku-Band RF frequencies. Featuring a drop down front panel providing access to two “hot swappable” frequency
conversion modules, this unit offers either a mix of conversion functionality or 1:1 redundant system operation.
Designed for rack mounting , the MBT-5000’s 1RU 19-inch chassis front panel contains all operator controls, indicators and displays for
local and remote with RF, IF, power, and communications interfaces on the rear. When configured with the redundancy option, the main
chassis contains two diode “OR-ed” internal power supplies for increased reliability along with the necessary IF/RF switches. Providing
the level of RF frequency conversion performance that has historically been associated with 70/140 MHz rack mount converter systems,
the MBT-5000 provides a smooth IF infrastructure upgrade path.
MBT-5003
The MBT-5003 is a 3 RU version of the MBT-5000, providing higher output power and a “single chassis” redundant solution. This
package is designed for rugged “fly-away” terminal use.
Applications
The flexibility of the MBT-5000 & MBT-5003 make them ideally suited for:
- Earth stations where L-Band IF products are being integrated into a 70/140 MHz IF infrastructure
- Reconfigurable Multi-Band requirements that are typically found in transportable / flyaway type installations
Block Up Converter (BUC-5000)
The BUC-5000 field interchangeable module translates an L-Band input carrier to the desired output frequency(C, X, or Ku-Band) with an
output level capable of driving an HPA. Available bands include:
BLOCK Down Converter (BDC-5000)
The BDC-5000 field interchangeable module translates a band specific input frequency block (C, X, or Ku), from the LNA, down to
L-Band (950 to 2000 MHz). Available bands include:
|
|
|
|
|
|
