• Home
  • Codan 6710 10W C-Band Block Upconverter




Codan 6710 10W C-Band Block Upconverter

(0) No Reviews yet
  • Std. C-Band 5.850 - 6.425 GHz
  • 48 VDC via Power Connector
  • Type N female output connector
  • Type N female input connector


SKU: SATRES-28461

6710-N/S-48/EX Specifications
RF output connector 6710-N/S-48/EX
RF output VSWR 2.0:1 max
RF output frequency range 5.85 to 6.725 GHz
Input frequency range 950 to 1525 MHz
RF output power @ 1 dB GCP +40.0 dBm min
LO frequency 7300 MHz & 7375 MHz
Gain 71 dB nominal
Gain flatness over any 40 MHz band ±1.50 dB max
Gain flatness over full band ±2.50 dB max
Gain stability over any 50°C temperature range when frequency set ±1.50 dB max
Gain stability over entire temperature range when frequency set ±2.0 dB max
Gain stability over entire temperature range when frequency not set ±4.0 dB max
Reference frequency 10 MHz
Reference frequency input (External) Multiplexed on N-type transmit IF input
Reference frequency level –10 to +5 dBm
Reference frequency connector Via N-type transmit IF input
Frequency conversion Spectrum Inverting
Output Power Meter Range 15 dB
Output power meter absolute accuracy when compensation frequency set ±1.0 dB max
Output power meter absolute accuracy when compensation frequency not set ±2.0 dB max
Output power meter relative accuracy when compensation frequency set±0.5 dB max
Output power meter relative accuracy when compensation frequency not set±1.0 dB max
Power meter modesCW and burst with adjustable threshold
Power supply voltage @ 48V+34V to +60 VDC via transmit IF input
Power supply voltage @48 V+34 V to +60 VDC via transmit IF input
Power supply minimum turn-on voltage @ 48 V+41 V
Power supply consumption130 W max
RF output IMD ratio with 2 carriers each @ 6 dB OPBO-26 dBc min
Weight 6.0 kg nominal
Common Specifications
IF input connector N-type
IF input impedance 50 Ω
IF input VSWR 1.5:1 max
Transmit attenuator steps 0 dB to 12 dB in 4 dB steps
Spurious output @ 3 dB OPBO –50 dBc max
Harmonic output @ 3 dB OPBO -60 dBc max
Maximum phase noise (SSB) of reference frequency

    100 Hz

    1 kHz

    10 kHz

    100 kHz


–135 dBc/Hz

–145 dBc/Hz

–155 dBc/Hz

–155 dBc/Hz
Phase noise (SSB) of BUC with frequency

reference defined above

nbsp;   100 Hz

    1 kHz

    10 kHz

    100 kHz




–63 dBc/Hz

–73 dBc/Hz

–83 dBc/Hz

–93 dBc/Hz
Group delay

    Linear (over any 10 MHz band)

    Parabolic (over any 80 MHz band)

    Ripple (over full band)


2 nsecpp max

0.00025 nsec/MHz²pp max

1 nsecpp max
AM/PM conversion 2.0°/dB max @ 2 dB OPBO
Monitor & Control
FSK data format User selectable
FSK data transmitter frequency 650 kHz ±1%
FSK data transmitter deviation ±60 kHz ±1%
FSK data transmitter sense +60 kHz=mark:-60 kHz=space
FSK output level -3 dB nominal
FSK start tone time 10 ms minimum
FSK data receiver nominal frequency650 kHz
FSK data receiver locking range ±30 kHz
FSK data receiver input sensitivity-15 dBm minimum
Digital data format RS232 9600 bps, 8 bits, no parity, 1 stop bit, ASCII protocol
Digital data format RS485 User selectable
Digital connector MIL-C-26482 12-14S socket
Environmental
Operating temperature range –40 to +55°C
Relative humidity 100%
Weatherproofing Sealed to 34 kPa

Ratings & Reviews

No reviews available

Be the first to Write a Review