• Home
  • AvL Technologies 1810C 1.8M Vehicle Mount SNG Antenna




AvL Technologies 1810C 1.8M Vehicle Mount SNG Antenna

(0) No Reviews yet
  • 2-axis cable drive positioner
  • Single-piece carbon fiber reflector
  • 3-axis Jog Controller with auto-stow
  • 2-port C-Band Linear feed


SKU: SATRES-24719

MODEL 1810C AvL Carbon Fiber 1.8 METER MOTORIZED VEHICULAR SNG ANTENNA
Reflector 1.8 meter AvL Carbon-Fiber
FeedPrecision Horn
Optics Offset, Prime Focus
Drive System Patented Roto-Lok® Positioner
Mount Geometry Elevation over Azimuth
Polarization Adjustment Rotation of Feed
Electrical RF
Frequency

    Receive

    Transmit


3.625 - 4.2 GHz

5.850 - 6.425 GHz
Gain (Midband)

    2-port

      Receive

      Transmit




35.5 dBi

39.5 dBi
VSWR

    Receive

    Transmit


1.30:1

1.30:1
Beamwidth (degrees)

    -3 dB (Optional Insat)

      Receive

      Transmit

    -10 dB (Optional Insat)

      Receive

      Transmit




3.0°

2.0°



5.1°

3.3°
First Sidelobe Level (Typical)

    Receive

    Transmit


-16 dB

-16 dB
Radiation Pattern

    Transmit - 1.5° to 30°

    Receive - 2.4° to 30°


29-25 log Ø

32-25 Log Ø
Antenna Noise Temperature 45° K at 10° Elevation
Polarization Linear standard, Optional Circular
Power Handling Capacity 1.0KW per port
Cross-Pol Isolation - On-axis

   Linear

      Receive

      Transmit

    Circular

      Receive

      Transmit




35 dB

35 dB



19 dB

25 dB
Feed Port Isolation - TX to RX 70 dB
Satellite System Compliance Compatible for 2º Satellite Spacing
Controllers
Standard Three-axis Jog Control & Display with Auto-stow
Optional Upgrades
Semi-automatic Operation Drive to calculated position based on operator entered

vehicle location, heading, plus satellite (longitude or listed)
Automatic Operation Drive to calculated position based on auto GPS and Flux- Gate Compass data and satellite peaking with LNB signal
Size Two Rack Units for Semi-automatic & Automatic Controllers Single Rack Unit for Auto-acquisition
Input Power 110/240 VAC, 1 ph, 50/60 Hz, 8/4A peak, 1A continuous
Mechanical
Az/El Drive System Patented Roto-Lok® Cable Drive System
Polarization Drive SystemNon back-driving Worm Gear
Travel

    Azimuth



    Elevation

      Mechanical

      Electrical

    Polarization

 


400° with all 2-port and 4-port with HPA(s) on antenna,

270° Standard with 4-port and HPA(s) in Vehicle

True elevation readout from calibrated inclinometer

0° to 90° of Reflector Boresight

Standard limits at 5° to 65° (CE Approval) or 5° to 90°

±95° for 2-port and 3-port Feeds

±50°, 100º Effective for 2-port Wideband and 4-port feeds
Speed

    Slewing/Deploying

    Peaking


2°/second

0.1°/second
Motors 24V DC Variable Speed, Constant Torque
RF Interface

    HPA Mounting

    Axis Transition

    Waveguide



    Coax


Feed Boom or Rear of Reflector, or inside Truck

Rotary Joints in Az,El, and Pol

WR 137 Flat Flange at center of azimuth axis

WR 229 Flat Flange at feed omt

RG59 run from feed to base plus 25 ft. (8 m)
Electrical Interface 25 ft. (8 m) Cable with Connectors for Controller
Manual DriveHandcrank on Az and El Axii, Leads from 12VDC Pol Motor
Weight 275 lbs. (125 kg)
Stowed Dimensions 100 L x 74 W x 20 H inches (254 L x 188 W x 58 H cm)

Optional 18 inch Height (46 cm)
Environmental
Wind

    Survival

      Deployed

      Stowed

    Operational




80 mph (129 kmph)

125 mph (201 kmph)

45 mph (72 kmph), Gusts to 60 mph (97 kmph)
Pointing Loss in Wind

    20 mph (32 kmph)

    30 Gusting to 45 mph


0.1 dB

0.4 Maximum
Temperature

    Operational

    Survival


-20 to 125°F (-29° to 51° C)

-40° to 140°F (-40° to 60° C)

Ratings & Reviews

No reviews available

Be the first to Write a Review