• Home
  • AvL Technologies 1660/1220 1.6M Tri-Band SNG Antenna




AvL Technologies 1660/1220 1.6M Tri-Band SNG Antenna

(0) No Reviews yet
  • Segmented carbon-fiber reflector
  • C, Ku, X and Ka feeds
  • Lightweight, packs in 3 cases
  • One-button auto-acquisition


SKU: SATRES-24652

Model 1660 / 1220 PIB F/A
Reflector Type 1.6M 4 Segment Carbon Fiber
Optics Offset, Prime Focus, 0.8 F/D
Interchangeable Feeds C LP or CP, X CP, Ku LP, Ka CP
Positioner Case-based Pack-in-the-Box
Az/El Drive System Patented Roto-Lok® Positioner
Mount Geometry Elevation over Azimuth
Polarization Adjustment Motorized Rotation of Linear Feeds
Mechanical/Environmental
Travel

    Azimuth

    Elevation (Operational)

    Polarization (LP Feeds)


±200°

0°-90° with ±200° Az Travel

±95° Adjustable within <1°
Speed

    Slewing/Deploying

    Peaking

    Tracking


2°/second Az; 1°/second El

0.2°/second

0.1°/second
Emergency Drive Hand crank on Az, El; hand knob on Pol
Interfaces

    HPA Mounting

    RF

    Electrical


Feed boom or behind reflector (additional CFE case or optional case required)

Coax (2) at base, Flex Waveguide from feed with groove

25 ft. Cable with Connectors for Controller
Set-up Time Less than 30 minutes
Wind

    Operational

    Survival


30 mph gusting to 45 mph (Anchoring required when gusts exceed 40 mph)

80 mph (With anchoring in zenith stowed position)
Pointing Loss

    Ku-Band Rx

    Ka-Band Rx


0.4 dB typical, 0.7 dB max in operational wind

1.0 dB typical, 1.7 dB max in operational wind
Temperature

    Operational

    Survival


+14° to 125°F (-10° to 52°C)

-40° to 140°F (-40° to 60°C)
Controllers
Auto-Acquisition One-button deploy with auto acquisition, peaking, and cross-pol adjustment using GPS, compass, and level-sensor inputs; certified for auto-commission on certain satellite systems
Tracking Inclined orbit step-tracking with CFE or optional beacon receiver
Operator Interface Front panel or Hand Held Remote or Remote PC options
Positioning Accuracy ± 0.2°
Input Power Single phase 110/240 60/50 Hz 10 A peak, 2 A continuous
C-Band Feeds
Frequency

    Receive

    Transmit


3.625-4.20 Ghz

5.85 -6.425 Ghz
Polarization Linear or circular options
Gain (Midband)

    Receive

    Transmit


34.2 dBi

38.1 dBi
Antenna Noise Temp @ 20° El 48° K
G/T with 20°K LNB, Midband 15.8 dB/° K
Radiation Pattern Compliance 29-25 log θ dBi , 3.5° > θ < 36°
Circular Axial Ratio

(within Pointing Cone)

    Receive

    Transmit




2.3 dB

1.3 dB
Linear Cross Pol Isolation

(in Ptg. Cone)

    Receive

    Transmit




>30 dB

>30 dB
Power Handling Capability 1000 watts per port
X-Band Feeds
Frequency

    Receive

    Transmit


7.25 - 7.75 Ghz

7.9 - 8.4 Ghz
Polarization Circular RHCP or LHCP
Gain (Midband)

    Receive

    Transmit


39.7 dBi

40.5 dBi
Antenna Noise Temperature @ 20° El 45° K
G/T with 55°K LNB, Midband 19.7 dB/° K
Radiation Pattern Compliance MIL - STD - 188-164A
Axial Ratio within Tracking Cone

    Receive

    Transmit


1.21 dB

2.0 dB
Power Handling Capability 1000 watts per port
Ku-Band Feeds
Frequency

    Receive

    Transmit


10.95-12.75 Ghz

13.75-14.5 Ghz
Polarization Orthogonal Linear, Optional Co-pol Linear
Gain (Midband)

    Receive

    Transmit


43.7 dBi

45.3 dBi
Antenna Noise Temperature @ 20° El 54° K
G/T with 50°K LNB, Midband 23.5 dB/° K
Radiation Pattern Compliance IESS-601 Std. G and FCC 47CFR25.209
Cross Pol Isolation

    on-axis

      Receive

      Transmit

    within pointing cone

      Receive

      Transmit

    within pointing cone

      Receive

      Transmit




35 dB

35 dB



28 dB standard

30 dB standard



25 dB MM option

35 dB MM option
Power Handling Capability 500 watts per port
Ka-Band Feeds
Frequency Range (GHz)

    Receive

    Transmit


20.2 - 21.2 (military) or 17.7 - 20.2 (commercial)

30.0 - 31.0 (military) or 27.5 - 30.0 (commercial)
Polarization Circular RHCP and LHCP
Gain (Midband military) (dBi)

    Receive

    Transmit


50.6

53.8
Ant Noise Temperature @ 20° 107° K
G/T with 100°K LNB, 20.7 GHz 25.3 dB/° K
Radiation Pattern Compliance FCC and MIL - STD-188-164A
Axial Ratio

(CP only, within pointing cone)

    Receive

    Transmit




1.5 dB

1.0 dB
Power Handling Capability 250 watts per port

Ratings & Reviews

No reviews available

Be the first to Write a Review