Agilis AAV 628 4W Ku-Band VSAT Outdoor Transceiver

TX freq: 14.0 – 14.5 GHz
RX freq: 11.70 – 12.20 GHz
Output Interface : WR75/G
Input Interface : N type female

Price : Call For Price

	Share

Agilis AAV 628 4W Ku-Band VSAT Outdoor Transceiver

Agilis AAV 628 4W Ku-Band Transceiver. Tx Freq: 14.0 - 14.5 GHz, Rx Freq: 11.70 - 12.20 GHz, Output interface WR75/G, Input Type N female.

Agilis AAV 628 Series Ku-Band SPT (Ku-Band Single Package Transceiver) is a highly cost effective RF ODU (Outdoor Unit) Transceiver for satellite communication. It is designed for voice, data and broadband VSAT communication used in different modulation formats including BPSK, QPSK, QAM and FM.

The Agilis AAV 628 SPT is a highly integrated ODU that is comprised of Up Converter, SSPA (Solid State Power Amplifier), Down Converter, low phase noise synthesizer, power supply and built-in M&C. With independent frequency synthesizer, it enables end-users for transmission through different uplink and downlink transponders. In addition, Agilis has a wide range of SSPA booster options for higher power applications.

Agilis AAV 628 SPT is suitable for SCPC (Single Channel Per Carrier), MCPC (Multi-Channel Per Carrier), DAMA (Demand Assigned Multiple Access) and TDMA (Time Division Multiple Access) applications.

AAV 628 Transceiver Features

Available for all Ku-Band frequencies
Broadband data transmission
Easy installation & configuration
Built-in monitor and control
Higher power options available
Built-in image rejection filter
Very stable OCXO reference oscillator
Output power monitoring
Electronically tuneable synthesizer for Transmit and Receive
1.0 MHz frequency step size
Redundancy ready
Surge protection
70 or 140 MHz IF interface

Enhanced Monitor and Control

AAV 628 Ku-SPT offers M&C via RS232/485. It features full remote M&C through Windows using PC. These include:

Tx/Rx level monitoring
Temperature monitoring
RF output ON/OFF
Frequencies selection
Gain control
Automatic fault identification & alarm

Reliability

Field proven under harsh environment conditions. Agilis ODUs can withstand temperature ranging from -40°C to +60°C with up to 100% humidity.

Quality Assurance

All Agilis ODUs go through intensive active electrical stress screening with performance being monitored during screening. In addition, all units undergo 100% waterproof test equivalent to IP65 to ensure normal operation during tropical, cold and harsh environment.

AAV 628 4W Transceiver Specifications
Tx Frequency Range	14.0 - 14.5 GHz
Rx Frequency Range	11.70 - 12.20 GHz
Power Output @ P1dB (min)	36 dBm
Min Gain	61 - 66 dB
Typical AC Power Consumption (VA)	150
Input Frequency	70±18 MHz (Optional 140±36 MHz
Output Frequency	Ku-Band
Frequency Step Size	1.0 MHz
IF Input Power Range	-25 to -5 dBm
Gain Flatness for 500MHz Bandwidth	±2.0 dB max
Gain Flatness for 36 MHz Bandwidth	±1.25 dB max
Gain Adjustment	20 dB@0.5 dB steps
Gain Stability (-40°C to +60°C)	±2.0 dB max
Spurious (36 MHz BW)	-55 dBc max
Intermodulation Product (with 2 carriers at 3dB OPBO composite power)	-25 dBc max
Phase Noise @100Hz offset @1kHz offset @10 kHz offset @ 100 kHz offset	-60 dBc/Hz -70 dBc/Hz -80 dBc/Hz -90 dBc/Hz
IF Input Interface	50 ohm N-type Female
RF Output Interface	WR75/G
Frequency Stability	±0.5 ppb/day
Monitor and Control (optional)
Interface	RS232/485
Optional Interface	FSK, Ethernet IP 10/100 Base-T, SNMP
Form 'C' Relay Contacts	Optional
Compliance Standard
IEC 60950	International Safety Standard for Information Technology Equipment
ETSI EN 300 673	Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Very Small Aperture Terminal (VSAT)
ETSI EN 301 489-1	Electromagnetic Compatility and Radio Spectrum Matters (ERM); Electromagnetic Compatility Standard for Radio Equipment and Services
Environmental
Operating Temperature	-40°C to +60°C
Relative Humidity	up to 100%
Receive (exclude LNB)
Input Frequency	950 to 1450 MHz (Optional 900 to 1700 MHz)
Output Frequency	70±18 MHz (Optional 140±36 MHz)
Output Frequency (Optional)	950 to 1450 MHz
Frequency Step Size	1.0 MHz
Gain	25 dB min
Gain Adjustment	20 dB @ 1 dB steps
Gain Flatness for 36 MHz Bandwidth	±1.25 dB max
Gain Stability (-40°C to +60°C	±3.0 dB max
Spurious (36 MHz BW)	-55 dBc max
Intermodulation Product	-35 dBc max
Phase Noise @100Hz offset @1kHz offset @10 kHz offset @ 100 kHz offset	-60 dBc/Hz -70 dBc/Hz -80 dBc/Hz -90 dBc/Hz
RF Input / IF Output Interface	50 ohm N-type Female
Power Supply
Input Voltage (Factory Preset)	220VAC, 110VAC or 48VDC
DC Output VOltagle to LNA	+13VDC at RF In Connector
Phase Locked Low Noise Block (PL LNB)
Input Frequency	Ku-Band
Output Frequency	950 to 1700 MHz
Noise Figure / Temperature at 25°C	1.0 dB / 75°K
Gain	58 dB typ
Gain Flatness (36 MHz BW)	±0.25 dB max
External Reference	10 MHz
Input Interface	WR75/G
Output Interface	50 ohm N-Type female
Mechanical
Dimensions (L x W x H)	310 mm x 240 mm x 98 mm
Weight	7.5 kg
Color	White Powder Coat

Name		X

What to Expect

Policies and Procedures